Console10x10
About the Console10x10 PCB
Console10x10 is an open source PCB design by nbxmike, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 53 components from 9 distinct parts.
By type, the board carries 29 resistors, 4 transformers, 2 connectors and 2 LEDs.
It belongs with the robotics & motion designs in this gallery.
From the project
PSOC 5LP based HID targeting robot operator's consoles using the CY8CKIT-059
This is an expansion of the operator console for FIRST Robotic Competitions originally published on the Cypress Semiconductor website: https://community.cypress.com/thread/30090 based on the CY8CKIT-059 development board. I had previously released hardware to ease the creation of the console, publised on the Cypress website: https://community.cypress.com/thread/30074
Console10x10 bill of materials (BOM)
53 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X26 | Pin_Header_Straight_1x26 | J1, J2 |
| 3 | CONN_01X05 | PTSA-5 | AnalogIO1, JS1, JS2 |
| 4 | HOLE | MH-No6-3p5 | B1, B2, B3, B4 |
| 7 | CONN_01X04 | PTSA-4 | Button1, Button2, Button3, Button4, Button5, Button6, Button7 |
| 2 | CONN_01X04 | Pin_Header_Straight_1x04 | I2C1, UART1 |
| 4 | TP | TP-TH | T1, T2, T3, T4 |
| 2 | CONN_01X06 | PTSA-6 | LED0, LED1 |
| 8 | 330 | Resistor_Horizontal_RM10mm | R1, R2, R3, R4, R5, R6, R7, R8 |
| 21 | 4.7K | Resistor_Horizontal_RM10mm | R9, R10, R11, R12, R13, R14, R15, R16 +13 |
Console10x10 design files
The KiCad project lives in the nbxmike/PSOC-Console repository on GitHub; these links point at the commit this page was built from.
Console10x10: common questions
How big is the Console10x10 PCB?
The Console10x10 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Console10x10?
53 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Console10x10 design files?
From the nbxmike/PSOC-Console repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Console10x10 design in my own project?
The repository has no license, so all rights stay with nbxmike. Use it as a reference, and ask the author before reusing the design.
More boards in PSOC-Console
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979