HardLabs

StagyOrtho58Hardware

neerajadsul·Stagy58·StagyOrtho58Hardware/StagyOrtho58Hardware.kicad_pcb

StagyOrtho58Hardware PCB layout, top view — open source RP2040/RP2350 board by neerajadsul

About the StagyOrtho58Hardware PCB

StagyOrtho58Hardware is an open source RP2040/RP2350 PCB design by neerajadsul, published on GitHub under the MIT license. It is a 2-layer board measuring 157.7 × 126.1 mm, with 65 components from 10 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the MCP23S17_ML. By type, the board carries 30 switches, 29 diodes, 2 ICs, 2 capacitors, 1 connector and 1 resistor.

It belongs with the keyboards designs in this gallery.

From the project

Custom Mechanical Keyboard : Ortholinear, Split, Staggered

Main components on the StagyOrtho58Hardware

PicoMCP23S17_ML

StagyOrtho58Hardware bill of materials (BOM)

65 components, 10 distinct parts.

QtyPartRefs
1
Pico
U1
1
MCP23S17_ML
U2
1
USB_C_Receptacle_USB2.0
J1
25
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW8, SW9 +17
3
SW_Push
SW7, SW13, SW27
1
SW_Push
SW19
1
SW_SPST
SW100
29
1N4148W
D1, D2, D3, D4, D5, D6, D10, D11 +21
2
C
C1, C2
1
0
R1

StagyOrtho58Hardware design files

The KiCad project lives in the neerajadsul/Stagy58 repository on GitHub; these links point at the commit this page was built from.

StagyOrtho58Hardware: common questions

What microcontroller does the StagyOrtho58Hardware use?

The StagyOrtho58Hardware is built around the Pico, from the RP2040/RP2350 family.

How big is the StagyOrtho58Hardware PCB?

The StagyOrtho58Hardware measures 157.7 × 126.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the StagyOrtho58Hardware?

65 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the StagyOrtho58Hardware design files?

From the neerajadsul/Stagy58 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the StagyOrtho58Hardware design in my own project?

Yes, under the terms of its MIT license, which neerajadsul chose for the repository.

Can I test firmware for the StagyOrtho58Hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Stagy58

Similar boards