74HC165-breakout board
About the 74HC165-breakout board
74HC165-breakout board is an open source PCB design by neilenns, published on GitHub under the MIT license. It is a 2-layer board measuring 88 × 40 mm, with 29 components from 6 distinct parts.
Other key parts include the 74HC165. By type, the board carries 10 connectors, 8 resistors, 4 ICs and 4 capacitors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
74HC165 breakout board for use with Arduino or similar
This PCB provides access to the inputs of four serially connected 74HC165s. It's perfect for expanding the number of inputs available on smaller Arduinos like the Pro Micro or Nano when building flight simulator components that interact with MobiFlight.
These boards are ready to order from JLCPCB with their SMT fabrication service. You'll receive boards with all the components soldered on except for the pin headers which you add yourself.
Main components on the 74HC165-breakout board
74HC165-breakout board bill of materials (BOM)
29 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 74HC165 | SOIC-16_3.9x9.9mm_P1.27mm | U1, U2, U3, U4 |
| 9 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 +1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 3 | MountingHole | JLCPCB_Tooling_Hole | H5, H6, H7 |
| 4 | 100nF | C_0805_2012Metric | C1, C2, C3, C4 |
| 8 | R_Pack04 | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
74HC165-breakout board design files
The KiCad project lives in the neilenns/74HC165-breakout-board repository on GitHub; these links point at the commit this page was built from.
74HC165-breakout board: common questions
How big is the 74HC165-breakout board?
The 74HC165-breakout board measures 88 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 74HC165-breakout board?
29 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the 74HC165-breakout board design files?
From the neilenns/74HC165-breakout-board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 74HC165-breakout board design in my own project?
Yes, under the terms of its MIT license, which neilenns chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979