Time wasting it
NemoAndrea·time-wasting-it·pcb/kicad/clock_board.kicad_pcb
About the Time wasting it PCB
Time wasting it is an open source PCB design by NemoAndrea, published on GitHub. It is a 2-layer board measuring 113.7 × 113.7 mm, with 53 components from 6 distinct parts.
By type, the board carries 14 resistors, 12 transistors, 12 inductors and 2 switches.
It belongs with the power & battery designs in this gallery.
From the project
Raspberry Pi powered light clock that reimagines the ''Time Wasting, It..." artwork by Bo Andrea. in modern hardware.
'Time, wasting-it' is a simple, raspberry pi-powered clock that uses lights instead of hands or digits to convey the time. At random points in time (configurable), the clock will show a playful light pattern. The demonstration and original build uses incandescent lights, but other types of lights can be used without modification.
The light clock synchronises with internet time, and hence will automatically adjust to winter and summer time. The clock runs a web interface that can be accessed via SSH and exposes manual controls to the user. A different time can be set, some of the config…

Time wasting it bill of materials (BOM)
53 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | IRLZ44N | TO-220-3_Horizontal_TabDown | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +4 |
| 13 | 12V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | Lamp_term1, Lamp_term2, Lamp_term3, Lamp_term4, Lamp_term5, Lamp_term6, Lamp_term7, Lamp_term8 +5 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 12 | LED | LED_D3.0mm | L1, L2, L3, L4, L5, L6, L7, L8 +4 |
| 12 | 500ohm | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +4 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13, R14 |
Time wasting it design files
The KiCad project lives in the NemoAndrea/time-wasting-it repository on GitHub; these links point at the commit this page was built from.
Time wasting it: common questions
How big is the Time wasting it PCB?
The Time wasting it measures 113.7 × 113.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Time wasting it?
53 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Time wasting it design files?
From the NemoAndrea/time-wasting-it repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Time wasting it design in my own project?
The repository has no license, so all rights stay with NemoAndrea. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k