HumbuckerAmplifier
Neofoxx·HumbuckerAmplifier·HW/HumbuckerAmplifier.kicad_pcb
About the HumbuckerAmplifier PCB
HumbuckerAmplifier is an open source PCB design by Neofoxx, published on GitHub. It is a 2-layer board measuring 64 × 24 mm, with 40 components from 14 distinct parts.
Other key parts include the TLV2170. By type, the board carries 15 connectors, 12 resistors, 11 capacitors, 1 IC and 1 diode.
It belongs with the audio designs in this gallery.
From the project
An amplifier for humbucking pickups (ALL THE GAINZ)
Note, you need either a 4-wire pickup, or some soldering skills. You cannot use a series humbucker, or a parallel humbucker
The curcuit uses a dual opamp, so you can play around with voicing without fear of power supply modulation distortion etc.
A TLV2170 will give great results, as will an MC33171. Other opamps like TL072 or TL062 will be OK, but in that case I suggest upping the voltage to 18V. Consult the schematic.

Main components on the HumbuckerAmplifier
HumbuckerAmplifier bill of materials (BOM)
40 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV2170 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 15 | Conn_01x01 | SolderPad_2x3mm | J1, J2, J3, J4, J5, J6, J7, J8 +7 |
| 1 | SGP0230SD | D_SOD-323_HandSoldering | D1 |
| 1 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 4 | 100nF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3, C4, C5 |
| 1 | 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 4 | ? | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8, C9, C10 |
| 1 | ?pF | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11 |
| 2 | 1Meg | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | 0R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 30k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 3 | 220k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R8 |
| 1 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 4 | ? | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R11, R12 |
HumbuckerAmplifier design files
The KiCad project lives in the Neofoxx/HumbuckerAmplifier repository on GitHub; these links point at the commit this page was built from.
HumbuckerAmplifier: common questions
How big is the HumbuckerAmplifier PCB?
The HumbuckerAmplifier measures 64 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HumbuckerAmplifier?
40 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the HumbuckerAmplifier design files?
From the Neofoxx/HumbuckerAmplifier repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the HumbuckerAmplifier design in my own project?
The repository has no license, so all rights stay with Neofoxx. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687