Riotee SolarShield
About the Riotee SolarShield PCB
Riotee SolarShield is an open source PCB design by NessieCircuits, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 55.9 × 25.4 mm, with 7 components from 4 distinct parts.
By type, the board carries 2 connectors and 1 switch.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
The solar shield plugs into the headers of the Riotee board. It has four small solar cells and a sliding switch to selectively switch on one, three, or all solar cells. This way you can experiment and see which configuration works best under the given light conditions.
The solar shield plugs into the headers of the Riotee board. It has four small solar cells and a sliding switch to selectively switch on one, three, or all solar cells. This way you can experiment and see which configuration works best under the given light conditions.
- Schematics - Layout - Rendering - Gerber - BOM
Riotee SolarShield bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PH1-10-UA Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | PH1-12-UA Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J2 |
| 4 | KXOB25-05X3F-TR KXOB25-05X3F | AS_KXOB25_23x08 | SC1, SC2, SC3, SC4 |
| 1 | ADE02S04 SW_DIP_x02 | TE_1825058-1 | SW1 |
Riotee SolarShield design files
The KiCad project lives in the NessieCircuits/Riotee_SolarShield repository on GitHub; these links point at the commit this page was built from.
Riotee SolarShield: common questions
How big is the Riotee SolarShield PCB?
The Riotee SolarShield measures 55.9 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Riotee SolarShield?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Riotee SolarShield design files?
From the NessieCircuits/Riotee_SolarShield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Riotee SolarShield design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which NessieCircuits chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k