Usb3
neuroidss·FreeEEG32-beta·AssemblyFiles/KiCAD/usb3.kicad_pcb
About the Usb3 PCB
Usb3 is an open source STM32 PCB design by neuroidss, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 99.1 × 99.1 mm, with 185 components from 27 distinct parts.
Its main chip is the STM32H743ZIT6U, from the STM32 family. Other key parts include the AD7771BCPZ, LP5907QMFX-3.3Q1, ADR4525BRZ, CB3LV-3I-8M1920 and LSM6DSOXTR. By type, the board carries 122 capacitors, 44 connectors, 16 ICs, 2 diodes and 1 transformer.
From the project
as FreeEEG32 plus alpha1.5 test passed, FreeEEG32 project changed to beta version
Docker container setup (Linux). Extract the following and run: - Compilation: ./gcc-arm-none-eabirun.sh - Flashing: sudo ./openocdflash.sh
The AC6 stuff is deprecated but the blue pill is still needed.
Assembly: https://github.com/neuroidss/FreeEEG32-beta/blob/master/AssemblyFiles/KiCAD/out/assembly.zip
BOM: https://github.com/neuroidss/FreeEEG32-beta/blob/master/AssemblyFiles/bom/components%20FreeEEG32%20beta.csv

Main components on the Usb3
Usb3 bill of materials (BOM)
185 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | AD7771BCPZ AD7779 | QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm_ThermalVias | U1, U2, U3, U4 |
| 3 | LP5907QMFX-3.3Q1 LP5907 | SOT-23-5 | U5, U6, U10 |
| 1 | ADR4525BRZ ADR4525 | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | CB3LV-3I-8M1920 FXO-SM7_OSC-SMD7050_short | Oscillator_SMD_EuroQuartz_XO91-4Pin_7.0x5.0mm_HandSoldering | U8 |
| 1 | STM32H743ZIT6U STM32F765ZITx | LQFP-144_20x20mm_P0.5mm | U9 |
| 1 | LSM6DSOXTR LSM6DS3 | Bosch_LGA-14_3x2.5mm_P0.5mm | U11 |
| 1 | SN6505BDBVR SN6505A | SOT-23-6_Handsoldering | U12 |
| 1 | 47352-1001 473521001 | 473521001 | U13 |
| 3 | ISO7341c | SOIC-16W_7.5x10.3mm_P1.27mm | U14, U15, U16 |
| 16 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 +8 |
| 8 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J17, J18, J19, J20, J29, J30, J32, J33 |
| 5 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J21, J22, J31, J34, J38 |
| 4 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J23, J24, J35, J36 |
| 4 | Conn_02x18_Odd_Even | PinHeader_2x18_P2.54mm_Vertical | J25, J26, J27, J28 |
| 1 | 105017-1001 Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J37 |
| 6 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J39, J40, J41, J42, J43, J44 |
| 1 | 750315371 da2303 | SMT Power Transformer | T1 |
| 2 | MBR0520LT1G D_Schottky | SOD−123 | D1, D2 |
| 58 | CL05B104KO5NNNC 100n | C_0402_1005Metric | C1, C3, C7, C9, C11, C13, C14, C15 +50 |
| 28 | CL05A105KO5NNNC 1u | C_0402_1005Metric | C2, C4, C8, C10, C12, C16, C21, C23 +20 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | CL05B104KO5NNNC 100n | C_0603_1608Metric | C5, C17, C26, C38, C47, C59, C68, C80 +1 |
| 8 | CL05A105KO5NNNC 1u | C_0603_1608Metric | C6, C18, C27, C39, C48, C60, C69, C81 |
| 8 | GRM188R71A225KE15D 2.2u | C_0603_1608Metric | C85, C86, C87, C88, C100, C104, C109, C110 |
| 1 | GRM21BR60J226ME39L 22u | C_0805_2012Metric | C90 |
| 3 | GRM188R60J106ME47D 10u | C_0603_1608Metric | C92, C113, C115 |
| 6 | 100n | C_0402_1005Metric | C116, C117, C118, C119, C120, C121 |
| 1 | C0603C475K9PACTU 4.7u | C_0603_1608Metric | C122 |
Usb3 design files
The KiCad project lives in the neuroidss/FreeEEG32-beta repository on GitHub; these links point at the commit this page was built from.
Usb3: common questions
What microcontroller does the Usb3 use?
The Usb3 is built around the STM32H743ZIT6U, from the STM32 family.
How big is the Usb3 PCB?
The Usb3 measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb3?
185 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb3 design files?
From the neuroidss/FreeEEG32-beta repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Usb3 design in my own project?
Yes, under the terms of its AGPL-3.0 license, which neuroidss chose for the repository.
Can I test firmware for the Usb3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in FreeEEG32-beta
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k