12 open source boards using the ISO7341c
Real designs built with the ISO7341c, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Smu main 1
jaromir-sukuba
130 × 80 mm206 parts2LNo license188STM32
FreeEEG32-alpha1.5
neuroidss
70 × 70 mm192 parts4LAGPL-3.024STM32
A1 - Analogue Board
DumberThanUsual
309.1 × 225.1 mm273 parts2LNo license1STM32
Usb
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
DSMU A1
DumberThanUsual
172.8 × 214.7 mm272 parts2LNo license1STM32
Usb
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.0166STM32
Usb1
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Usb1
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.0166STM32
Usb2
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Usb2
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.0166STM32
Usb3
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Usb3
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.0166
The ISO7341c in open source designs
The gallery holds 12 open source boards using the ISO7341c from 4 GitHub repositories; a typical one measures about 99.1 × 99.1 mm and carries around 185 components.
92% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Smu main 1 by jaromir-sukuba.
Microcontrollers on boards using the ISO7341c
ISO7341c: common questions
Where can I find a ISO7341c reference design?
Each of the 12 boards on this page is a real design using the ISO7341c. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ISO7341c?
The LM393, OPA140, TL071 and TLP170D appear in the most repositories here.
Which microcontrollers do boards using the ISO7341c use?
Most are built on STM32 (11) and AVR/Arduino (1).
How big is a typical board using the ISO7341c?
The median is 99.1 × 99.1 mm, and 92% are two-layer designs.
What is the most popular open source board using the ISO7341c?
By GitHub stars, Smu main 1 by jaromir-sukuba, with 188 stars.
Can I simulate one of these boards using the ISO7341c before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.