Pihat
nickczj·pihat·kicad/spectra6-hat-7in3/spectra6-hat-7in3.kicad_pcb
About the Pihat PCB
Pihat is an open source PCB design by nickczj, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 174 × 123 mm, with 69 components from 38 distinct parts.
Other key parts include the CAT24C256 and INKY_EEPROM_CAT24C256. By type, the board carries 25 capacitors, 14 resistors, 8 test points, 4 connectors, 4 switches and 4 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This is the Phase 1 KiCad 10.0.1 project shell.
This is the Phase 1 KiCad 10.0.1 project shell.
- KiCad project file. - Schematic capture prep sheet with source-backed notes. - PCB outline placeholder for a 174 x 123 mm board. - Local symbol/footprint tables pointing to ../shared. - Source-backed capture/BOM seed: capture-bom-seed.csv.
Do not fabricate from this directory yet. The schematic still needs component-level capture from reference/despi-c73-schematic-20220728.pdf, then ERC, layout, and DRC.
Main components on the Pihat
Pihat bill of materials (BOM)
69 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CAT24C256 | U1 | |
| 1 | INKY_EEPROM_CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Si1308EDL | Q101 | |
| 1 | Si2301 | Q102 | |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | FH12-50S-0.5SH / GDEP073E01 FPC | Hirose_FH12-50S-0.5SH_1x50-1MP_P0.50mm_Horizontal | J2 |
| 2 | Qw/ST_I2C | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3, J4 |
| 1 | ID_WP | JP1 | |
| 1 | INKY_WP | SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | BTN_A | SW1 | |
| 1 | BTN_B | SW2 | |
| 1 | BTN_C | SW3 | |
| 1 | BTN_D | SW4 | |
| 1 | PREVGH | TestPoint_Pad_D1.0mm | TP101 |
| 1 | PREVGH1 | TestPoint_Pad_D1.0mm | TP102 |
| 1 | PREVGL | TestPoint_Pad_D1.0mm | TP103 |
| 1 | PREVGL1 | TestPoint_Pad_D1.0mm | TP104 |
| 1 | VCOM | TestPoint_Pad_D1.0mm | TP105 |
| 1 | VCOM1 | TestPoint_Pad_D1.0mm | TP106 |
| 1 | GND | TestPoint_Pad_D1.0mm | TP107 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GND1 | TestPoint_Pad_D1.0mm | TP108 |
| 4 | MBR0530 | D101, D102, D103, D104 | |
| 2 | 10uH 1A | L101, L102 | |
| 2 | L0603 120ohm@100MHz | L103, L104 | |
| 1 | 100n | C1 | |
| 3 | 4.7uF/25V | C101, C102, C115 | |
| 10 | 10uF/25V | C103, C104, C105, C106, C108, C109, C110, C117 +2 | |
| 2 | 0.47uF/25V | C107, C116 | |
| 6 | 1uF/25V | C111, C113, C114, C120, C121, C122 | |
| 1 | 2.2uF/25V | C112 | |
| 1 | 100uF/6.3V | C123 | |
| 1 | 0.1uF/25V | C124 | |
| 2 | 3.9k | R1, R2 | |
| 2 | 1M | R101, R102 | |
| 2 | 0.22ohm | R103, R104 | |
| 6 | 0ohm | R105, R106, R108, R109, R111, R112 | |
| 1 | NC | R107 | |
| 1 | 1ohm | R110 |
Pihat design files
The KiCad project lives in the nickczj/pihat repository on GitHub; these links point at the commit this page was built from.
Pihat: common questions
How big is the Pihat PCB?
The Pihat measures 174 × 123 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pihat?
69 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pihat design files?
From the nickczj/pihat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pihat design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which nickczj chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979