HardLabs

Streamdeck-Hackpad

nimishcoder1232·Streamdeck-Hackpad·pcb/Hackpad.kicad_pcb

Streamdeck-Hackpad PCB layout, top view — open source RP2040/RP2350 board by nimishcoder1232

About the Streamdeck-Hackpad PCB

Streamdeck-Hackpad is an open source RP2040/RP2350 PCB design by nimishcoder1232, published on GitHub. It is a 2-layer board measuring 94 × 96 mm, with 11 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. By type, the board carries 9 switches, 1 IC and 1 connector.

It belongs with the displays & leds designs in this gallery.

From the project

Foe the Hackclub, Blueprint event, I made a hackpad, that COULD in the future work as a stream deck.

Streamdeck-Hackpad, from the project README
From the project README

Main components on the Streamdeck-Hackpad

XIAO-RP2040-SMD

Streamdeck-Hackpad bill of materials (BOM)

11 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-SMD
U1
1
Conn_01x04_Pin
J1
9
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +1

Streamdeck-Hackpad design files

The KiCad project lives in the nimishcoder1232/Streamdeck-Hackpad repository on GitHub; these links point at the commit this page was built from.

Streamdeck-Hackpad: common questions

What microcontroller does the Streamdeck-Hackpad use?

The Streamdeck-Hackpad is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.

How big is the Streamdeck-Hackpad PCB?

The Streamdeck-Hackpad measures 94 × 96 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Streamdeck-Hackpad?

11 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Streamdeck-Hackpad design files?

From the nimishcoder1232/Streamdeck-Hackpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Streamdeck-Hackpad design in my own project?

The repository has no license, so all rights stay with nimishcoder1232. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Streamdeck-Hackpad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards