Hilaw

Niqtan·Hilaw·PCB/Polaroid_Cam.kicad_pcb

Hilaw PCB layout, top view — open source ESP32 board by Niqtan

About the Hilaw PCB

Hilaw is an open source ESP32 PCB design by Niqtan, published on GitHub under the MIT license. It is a 2-layer board measuring 60.5 × 103 mm, with 69 components from 39 distinct parts.

Its main chip is the C82899, from the ESP32 family. Other key parts include the TPS61088RHLR, RT8059GJ5, MMBT2222AM3T5G and BQ24075RGTR. By type, the board carries 23 capacitors, 22 resistors, 8 connectors, 6 ICs, 4 diodes and 2 switches.

From the project

Raw Camera (A.K.A just a 3D Printed Instant Camera)

Hilaw, in english, Raw, is a hybrid analog & digital camera used for taking personal pictures in order to preserve memories.

Before snapping a picture, a sample image will pop up in the TFT display, having a preview unlike traditional polaroid cameras. Then, using an Arducam module as the camera sensor, it is able to capture images with of high quality.

Afterwards, logic is sent to the thermal printer to print that picture instantly. In the long term, using a thermal printer with sticker paper (I want to be able to stick my memories), will be very cost-effective than traditional film paper…

Hilaw, from the project README
From the project README

Main components on the Hilaw

Hilaw bill of materials (BOM)

69 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C82899
ESP32-WROOM-32
U1
1
TPS61088RHLR
U3
1
RT8059GJ5
U5
2
MMBT2222AM3T5G
U6, U7
1
BQ24075RGTR
U8
1
C458143
2N7002BK, 215
Q1
1
C5187470
TYPE-C 6P LCH10.0
J2
1
C5251182
USE-702528-500PCBJST
J4
2
Conn_01x02_Pin
J5, J9
1
C7430380
Conn_01x24_Pin
J6
1
C49257
Conn_01x03_Pin
J7
1
C37208
Conn_01x06_Pin
J8
1
C81276
Conn_01x01_Pin
J10
1
NCU18XH103F6SRB
RT1
2
SKRPABE010
S1, S2
1
C396100
PTVS17VS1UR,115
D1
3
C7371905
XL-1608PGC-06
D2, D3, D4
1
C1033
2.2µ
L2
1
C167211
2.2µ
L3
7
C1592
1µ
C1, C2, C3, C4, C6, C8, C17
Show 19 more
QtyPartRefs
7
C7469954
22µ
C5, C10, C13, C14, C20, C21, C22
1
C1525
47n
C7
2
C1590
0.1µ
C9, C23
1
C1525
4.1p
C11
1
C1713
10µ
C12
3
C1705
4.7μ
C15, C16, C18
1
C1525
87p
C19
2
C23206
56K
R1, R2
4
C11702
1k
R3, R8, R17, R19
7
C25804
10k
R4, R5, R9, R10, R18, R20, R22
1
C23137
310k
R6
1
C23137
330K
R7
1
C25606
700K
R11
1
C4197
240k
R12
1
C23074
53.6k
R13
1
C25803
100k
R14
1
C18681
30k
R15
1
C100444
4k7
R16
1
C23263
910k
R21

Hilaw design files

The KiCad project lives in the Niqtan/Hilaw repository on GitHub; these links point at the commit this page was built from.

Hilaw: common questions

What microcontroller does the Hilaw use?

The Hilaw is built around the C82899, from the ESP32 family.

How big is the Hilaw PCB?

The Hilaw measures 60.5 × 103 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hilaw?

69 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hilaw design files?

From the Niqtan/Hilaw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hilaw design in my own project?

Yes, under the terms of its MIT license, which Niqtan chose for the repository.

Can I test firmware for the Hilaw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards