Lipo charger
noahwhite07·lipo-charger
About the Lipo charger PCB
Lipo charger is an open source PCB design by noahwhite07, published on GitHub. It is a 2-layer board measuring 32.3 × 25.4 mm, with 19 components from 18 distinct parts.
Other key parts include the MCP73831T-2DCI/OT, DIO6605BFN8 and AP9101CK6-AYTRG1. By type, the board carries 5 resistors, 3 ICs, 3 capacitors, 2 connectors, 2 diodes and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
A KiCad project for a custom LiPo battery charge, protect, and boost circuit
Main components on the Lipo charger
Lipo charger bill of materials (BOM)
19 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2DCI/OT MCP73831 | SOT-23-5 | U1 |
| 1 | DIO6605BFN8 DIO6605B | DFN-8-1EP_3x2mm_P0.5mm_EP1.6x1.5mm | U2 |
| 1 | AP9101CK6-AYTRG1 AP9101CK | SOT-23-5 | U3 |
| 1 | DMN2053UVT-7 DMN2053UVT | TSOT-23-6 | Q1 |
| 1 | USB3076-30-A USB_B_Micro | USB_Micro-B_GCT_USB3076-30-A | J1 |
| 1 | 22-23-2021 Molex | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Battery | JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | BT1 |
| 1 | OS102011MA1QN1 SW_SPDT | SW_CuK_OS102011MA1QN1_SPDT_Angled | SW1 |
| 1 | 150080VS75000 GREEN | LED_0805_2012Metric | D1 |
| 1 | 150080RS75000 RED | LED_0805_2012Metric | D2 |
| 1 | LQM21PN4R7MGRD 4.7uH | L_0805_2012Metric | L1 |
| 1 | CL21A106KOQNNNE 10uF | C_0805_2012Metric | C1 |
| 1 | CL21A475KPFNNNE 4.7uF | C_0805_2012Metric | C2 |
| 1 | CL21F104ZBANNNC 100nF | C_0805_2012Metric | C3 |
| 1 | AC0805FR-072KL 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | RC0805FR-07220RL 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5 |
| 1 | RC0805JR-071K1L 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | RC0805FR-07332RL 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Lipo charger design files
The KiCad project lives in the noahwhite07/lipo-charger repository on GitHub; these links point at the commit this page was built from.
- Layoutlipo_charger.kicad_pcb
- Schematiclipo_charger.kicad_sch
- BOMBOM.csv
Lipo charger: common questions
How big is the Lipo charger PCB?
The Lipo charger measures 32.3 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lipo charger?
19 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lipo charger design files?
From the noahwhite07/lipo-charger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lipo charger design in my own project?
The repository has no license, so all rights stay with noahwhite07. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k