HardLabs

Keyboard pico

NoamanKhalil·Keyboard-pico

Keyboard pico PCB layout, top view — open source RP2040/RP2350 board by NoamanKhalil

About the Keyboard pico PCB

Keyboard pico is an open source RP2040/RP2350 PCB design by NoamanKhalil, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 92.5 × 62 mm, with 19 components from 3 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 9 switches, 9 diodes and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

I worked on a keyboard project last summer and would like to open source it to support the dev community

❤️ Show Your Support! This project was a summer labor of love, created to share with the community for free! If you find it useful or just appreciate the effort, here are a few ways you can show your support:

⭐ Star this GitHub Repository! It helps with visibility and lets me know you like it.

🐦 Drop me a Follow on X (Twitter)! Let's connect and share more open-source adventures.

Keyboard pico, from the project README
From the project README

Main components on the Keyboard pico

RaspberryPi_Pico

Keyboard pico bill of materials (BOM)

19 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A2
9
Keyswitch
S1, S2, S3, S4, S5, S6, S7, S8 +1
9
Diode
D1, D2, D3, D4, D5, D6, D7, D8 +1

Keyboard pico design files

The KiCad project lives in the NoamanKhalil/Keyboard-pico repository on GitHub; these links point at the commit this page was built from.

Keyboard pico: common questions

What microcontroller does the Keyboard pico use?

The Keyboard pico is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keyboard pico PCB?

The Keyboard pico measures 92.5 × 62 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keyboard pico?

19 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keyboard pico design files?

From the NoamanKhalil/Keyboard-pico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keyboard pico design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Keyboard pico without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards