Wi-SUN-Module-Serial-Board
noriokun4649·Wi-SUN-Module-Serial-Board·Wi-SUN_Board/Wi-SUN_Board.kicad_pcb
About the Wi-SUN-Module-Serial-Board
Wi-SUN-Module-Serial-Board is an open source PCB design by noriokun4649, published on GitHub under the MIT license. It is a 2-layer board measuring 42.5 × 30 mm, with 15 components from 13 distinct parts.
Other key parts include the AP7333_33SAG_SOT23 and CH340E. By type, the board carries 5 capacitors, 3 resistors, 2 ICs, 2 connectors, 1 fuse and 1 switch.
It belongs with the usb & debug tools designs in this gallery.
From the project
MB-RL7023-11をUSBシリアルに変換する基板です
Main components on the Wi-SUN-Module-Serial-Board
Wi-SUN-Module-Serial-Board bill of materials (BOM)
15 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7333_33SAG_SOT23 | SOT-23 | U1 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | DF12NB_3.0_-20DS-0.5V_51_ | HRS_DF12NB_3.0_-20DS-0.5V_51_ | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_12402012E212A USB_C_Receptacle_USB2.0_12402012E212A | USB_C_Receptacle_Amphenol_12402012E212A | J2 |
| 1 | 350MA 350mA | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | F1 |
| 1 | SW_Push | TS-1187A-B-A-B | SW1 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 10UF 10uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 2 | 1UF 1uf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C4 |
| 1 | 0.1UF 0.1uf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 1UF 0.1uf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 470 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 2 | 5.1K 5.1k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
Wi-SUN-Module-Serial-Board design files
The KiCad project lives in the noriokun4649/Wi-SUN-Module-Serial-Board repository on GitHub; these links point at the commit this page was built from.
Wi-SUN-Module-Serial-Board: common questions
How big is the Wi-SUN-Module-Serial-Board?
The Wi-SUN-Module-Serial-Board measures 42.5 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wi-SUN-Module-Serial-Board?
15 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wi-SUN-Module-Serial-Board design files?
From the noriokun4649/Wi-SUN-Module-Serial-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wi-SUN-Module-Serial-Board design in my own project?
Yes, under the terms of its MIT license, which noriokun4649 chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389