12V-Class-AB-Audio-Amplifier

norisionut12·12V-Class-AB-Audio-Amplifier·KiCad_Design_Files/final.kicad_pcb

12V-Class-AB-Audio-Amplifier PCB layout, top view — open source board by norisionut12

About the 12V-Class-AB-Audio-Amplifier PCB

12V-Class-AB-Audio-Amplifier is an open source PCB design by norisionut12, published on GitHub under the MIT license. It is a 2-layer board measuring 75 × 45 mm, with 34 components from 26 distinct parts.

By type, the board carries 11 capacitors, 10 resistors, 5 transistors, 5 connectors and 3 diodes.

It belongs with the audio designs in this gallery.

From the project

Discrete 12V single-supply Class AB audio amplifier with active-low relay speaker protection and linear voltage regulator.

This repository contains the complete hardware design, mathematical analysis, SPICE simulation validation, and physical prototype implementation of a discrete 12V single-supply Class AB audio amplifier with an integrated speaker protection circuit and linear voltage regulator.

Designed entirely without integrated circuits (utilizing 5 discrete bipolar junction transistors), the amplifier processes a stereo line-level input from a laptop, PC, or smartphone, sums it into a mono signal, and drives an $8\text{ }\Omega$ speaker from a standard $12\text{ V}$ DC power adapter. Because a single-rail…

12V-Class-AB-Audio-Amplifier bill of materials (BOM)

34 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TIP31C
Q1, Q3
2
2N2222
Q2, Q5
1
TIP32C
Q4
1
Mufa Jack
J1
1
J_Audio
J2
1
J_Comanda_Releu
J3
1
Boxa
J4
1
Alimentare
J5
1
5V1
D1
2
1N4148
D2, D3
3
100nF
C1, C5, C9
1
10uF
C2
1
100uF
C3
1
1u
C4
2
1000uF
C6, C10
1
100pF
C7
1
47uF
C8
1
47u
C11
1
330
R1
2
1k
R2, R3
Show 6 more
QtyPartRefs
2
100k
R4, R10
1
10k
R5
1
220
R6
1
2k
R7
1
150
R8
1
10
R9

12V-Class-AB-Audio-Amplifier design files

The KiCad project lives in the norisionut12/12V-Class-AB-Audio-Amplifier repository on GitHub; these links point at the commit this page was built from.

12V-Class-AB-Audio-Amplifier: common questions

How big is the 12V-Class-AB-Audio-Amplifier PCB?

The 12V-Class-AB-Audio-Amplifier measures 75 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 12V-Class-AB-Audio-Amplifier?

34 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 12V-Class-AB-Audio-Amplifier design files?

From the norisionut12/12V-Class-AB-Audio-Amplifier repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 12V-Class-AB-Audio-Amplifier design in my own project?

Yes, under the terms of its MIT license, which norisionut12 chose for the repository.

Similar boards