Daisy freeze pedal

NormSohl·daisy-freeze-pedal·pcb/carrier/carrier.kicad_pcb

Daisy freeze pedal PCB layout, top view — open source board by NormSohl

About the Daisy freeze pedal PCB

Daisy freeze pedal is an open source PCB design by NormSohl, published on GitHub under the MIT license. It is a 2-layer board measuring 152 × 100.3 mm, with 22 components from 19 distinct parts.

Other key parts include the Daisy Seed3. By type, the board carries 5 connectors, 4 resistors, 2 switches, 2 capacitors, 1 IC and 1 diode.

It belongs with the audio and robotics & motion designs in this gallery.

From the project

Daisy based freeze pedal for drones for the WARBL

A line-level freeze/drone floor pedal (mono in, stereo out) built on the Electrosmith Daisy Seed3, designed for playing hands-free alongside a WARBL wind controller or analog synths. Hold a footswitch to record, release to loop; the loop plays back as a Clouds-style granular freeze with sub-octave, fifth and octave voices.

Ready to order. The DSP and controls are proven in a browser bench model. The carrier is a bare, all-through-hole board you solder yourself, routed and DRC-clean; the case is a parametric OpenSCAD model. Next: order bare boards and parts, print the case, then port the…

Daisy freeze pedal, from the project README
From the project README

Main components on the Daisy freeze pedal

Daisy freeze pedal bill of materials (BOM)

22 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Electrosmith Daisy Seed3 (on 2x 1x20 female headers)
Daisy Seed3
U1
1
No connector: solder 24-26 AWG leads into the J pads (either way round). Footswitch: soft-touch momentary SPST, panel mounted (Tayda)
Freeze footswitch
J1
1
No connector: solder 24-26 AWG leads into the J pads (either way round). Footswitch: soft-touch momentary SPST, panel mounted (Tayda)
Clear footswitch
J2
1
Neutrik NMJ6HCD2
In (mono; grounded when empty)
J3
1
Neutrik NMJ6HCD2
Out L / Mono
J4
1
Neutrik NMJ6HCD2
Out R (ring switch = plug detect)
J5
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K Dry
RV1
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K Loop
RV2
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K −8
RV3
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K +5
RV4
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K +8
RV5
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K Fade
RV6
1
Alpha RV09AF-40-20K-B10K (20 mm knurled shaft)
B10K Texture
RV7
1
E-Switch 100SP1T1B1M2RE (gold contacts; any 100SP1…M2 fits)
Single / Multi
SW1
1
E-Switch 100SP1T1B1M2RE (gold contacts; any 100SP1…M2 fits)
+5 up / down
SW2
1
5 mm bi-colour LED, common cathode (red/green), on a 4 mm spacer
Red/Green
D1
2
10 uF ≥25 V X7R radial MLCC, 5.08 mm leads (e.g. TDK FG20X7R1H106KRT06, 50 V, on Digi-Key)
10u
C1, C2
2
470R 1/4 W (choose per LED)
470
R1, R2
2
100k 1/4 W metal film
100k
R3, R4

Daisy freeze pedal design files

The KiCad project lives in the NormSohl/daisy-freeze-pedal repository on GitHub; these links point at the commit this page was built from.

Daisy freeze pedal: common questions

How big is the Daisy freeze pedal PCB?

The Daisy freeze pedal measures 152 × 100.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Daisy freeze pedal?

22 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Daisy freeze pedal design files?

From the NormSohl/daisy-freeze-pedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Daisy freeze pedal design in my own project?

Yes, under the terms of its MIT license, which NormSohl chose for the repository.

Similar boards