HardLabs

SEVILLA PA4-2

Noxctis·CpE2303L·SEVILLA_PA4-2/SEVILLA_PA4-2.kicad_pcb

SEVILLA PA4-2 PCB layout, top view — open source PIC board by Noxctis

About the SEVILLA PA4-2 PCB

SEVILLA PA4-2 is an open source PIC PCB design by Noxctis, published on GitHub. It is a 2-layer board measuring 100 × 50 mm, with 11 components from 7 distinct parts.

Its main chip is the PIC16F84A-XXP, from the PIC family. Other key parts include the HDSP-7401. By type, the board carries 3 ICs, 2 switches, 2 capacitors, 2 resistors, 1 crystal and 1 connector.

Main components on the SEVILLA PA4-2

HDSP-7401PIC16F84A-XXP

SEVILLA PA4-2 bill of materials (BOM)

11 components, 7 distinct parts.

QtyPartRefs
2
HDSP-7401
U1, U3
1
PIC16F84A-XXP
U2
1
4 MHz
Y1
1
Conn_01x02
J1
2
SW_SPST
SW3, SW4
2
20 pF
C1, C2
2
100
R1, R2

SEVILLA PA4-2 design files

The KiCad project lives in the Noxctis/CpE2303L repository on GitHub; these links point at the commit this page was built from.

SEVILLA PA4-2: common questions

What microcontroller does the SEVILLA PA4-2 use?

The SEVILLA PA4-2 is built around the PIC16F84A-XXP, from the PIC family.

How big is the SEVILLA PA4-2 PCB?

The SEVILLA PA4-2 measures 100 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SEVILLA PA4-2?

11 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the SEVILLA PA4-2 design files?

From the Noxctis/CpE2303L repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SEVILLA PA4-2 design in my own project?

The repository has no license, so all rights stay with Noxctis. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SEVILLA PA4-2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in CpE2303L

Similar boards