INV Boost Iso
About the INV Boost Iso PCB
INV Boost Iso is an open source PCB design by NTURacingTeam, published on GitHub. It is a 2-layer board measuring 100 × 143 mm, with 102 components from 20 distinct parts.
Other key parts include the ISO7720FDWV, TEC2-2411WI, TEL12-2415, AMC1350DWV and AMC3311. By type, the board carries 47 capacitors, 27 ICs, 11 connectors, 11 resistors and 6 inductors.
Main components on the INV Boost Iso
INV Boost Iso bill of materials (BOM)
102 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | ISO7720FDWV | SOIC-8_7.5x5.85mm_P1.27mm | U1, U5, U9, U13, U17, U21 |
| 6 | TEC2-2411WI | Converter_DCDC_Meanwell_xPx0xW8-xx_THT | U2, U6, U10, U14, U18, U22 |
| 6 | TEL12-2415 | Converter_DCDC_TRACO_TEL12-xxxx_THT | U3, U7, U11, U15, U19, U23 |
| 6 | AMC1350DWV | SOIC-8_7.5x5.85mm_P1.27mm | U4, U8, U12, U16, U20, U24 |
| 2 | AMC3311 | SOIC-16W_7.5x10.3mm_P1.27mm | U25, U26 |
| 1 | TPS22917DBV | SOT-23-6 | U27 |
| 1 | 15230682601000 | HARTING 15230682601000 | J1 |
| 6 | Conn_01x08 | JST_XA_S08B-XASK-1_1x08_P2.50mm_Horizontal | J2, J3, J4, J5, J6, J7 |
| 2 | HV+ | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J8, J10 |
| 2 | HV- | JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal | J9, J11 |
| 6 | GZ1608D601TF | C_0603_1608Metric | FB1, FB2, FB3, FB4, FB5, FB6 |
| 24 | 100n | C_0603_1608Metric | C1, C2, C4, C5, C6, C7, C9, C10 +16 |
| 12 | 2200p | C_8060_Murata_DK1 | C3, C8, C13, C18, C23, C28, C41, C42 +4 |
| 4 | 1u | C_0603_1608Metric | C31, C35, C36, C40 |
| 4 | 0u1 | C_0603_1608Metric | C32, C33, C37, C38 |
| 2 | 220n | C_0603_1608Metric | C34, C39 |
| 1 | 100p | C_0402_1005Metric | C47 |
| 8 | 2Meg | R_1206_3216Metric | R1, R2, R3, R4, R6, R7, R8, R9 |
| 2 | 20k | R_1206_3216Metric | R5, R10 |
| 1 | 0 | R_0402_1005Metric | R11 |
INV Boost Iso design files
The KiCad project lives in the NTURacingTeam/nturt_kicad_EP7 repository on GitHub; these links point at the commit this page was built from.
INV Boost Iso: common questions
How big is the INV Boost Iso PCB?
The INV Boost Iso measures 100 × 143 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the INV Boost Iso?
102 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the INV Boost Iso design files?
From the NTURacingTeam/nturt_kicad_EP7 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the INV Boost Iso design in my own project?
The repository has no license, so all rights stay with NTURacingTeam. Use it as a reference, and ask the author before reusing the design.
More boards in nturt_kicad_EP7
STM32VCU CM4
100 × 90 mm445 parts4LNo license0
STM32VCU CM5
100 × 90 mm418 parts4LNo license0
STM32INV Discrete Controller
100 × 100 mm351 parts4LNo license0
ACC BMSslave
200 × 50 mm306 parts4LNo license0
STM32INV Boost Controller
100 × 100 mm256 parts4LNo license0
STM32Steering Panel
90 × 80 mm243 parts4LNo license0
Steering Panel Under
100 × 90 mm137 parts4LNo license0
INV Discrete Power
120 × 100 mm119 parts2LNo license0
Raspberry PiDIY IMU RPIBASE
60 × 65 mm73 parts4LNo license0
INV Discrete Iso
100 × 40.5 mm67 parts4LNo license0
Dash Screen
100 × 90 mm53 parts2LNo license0