HardLabs

Pinstripe

null-ll·pinstripe·pcb/pinstripe/pinstripe.kicad_pcb

Pinstripe PCB layout, top view — open source AVR/Arduino board by null-ll
Simulate this board

About the Pinstripe PCB

Pinstripe is an open source AVR/Arduino PCB design by null-ll, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 323.9 × 123 mm, with 162 components from 22 distinct parts.

Its main chip is the ATmega32A-PU, from the AVR/Arduino family. By type, the board carries 77 LEDs, 69 diodes, 7 resistors, 5 capacitors, 1 IC and 1 crystal.

It belongs with the displays & leds and keyboards designs in this gallery.

From the project

Through-hole 60% keyboard with arrow keys, a rotary encoder, a SSD1306 OLED display, and a DS1307 I2C RTC module.

Through-hole 60% keyboard with arrow keys, a rotary encoder, a SSD1306 OLED display, and a DS1307 I2C RTC module.

OLED displays 24-hour time and bongo cat animation in default keymap.

For custom keymaps, add the keycode KC_SETTIME to a key (preferably not on the base layer).

Pinstripe, from the project README
From the project README

Main components on the Pinstripe

ATmega32A-PU

Pinstripe bill of materials (BOM)

162 components, 22 distinct parts.

QtyPartRefs
1
ATmega32A-PU
U1
1
16Mhz
Y1
1
DS1307
DS1307
1
500mA
F1
54
MX-NoLED
MX_0, MX_1, MX_2, MX_3, MX_4, MX_5, MX_6, MX_7 +46
1
MX-NoLED
MX_BKSP0
7
MX-NoLED
MX_CL1, MX_FN1, MX_LALT1, MX_LCTRL1, MX_RALT1, MX_RCTRL1, MX_WIN1
2
MX-NoLED
MX_CL2, MX_RS1
2
MX-NoLED
MX_ENTER1, MX_LS1
7
MX-NoLED
MX_LALT2, MX_LALT3, MX_LCTRL2, MX_RALT2, MX_RCTRL2, MX_TAB1, MX_\1
1
MX-NoLED
MX_RS0
1
MX-NoLED
MX_SPACE1
2
MX-NoLED
MX_SPACE2, MX_SPACE3
67
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +59
2
3.6V
D67, D68
2
22pF
C1, C2
2
0.1uF
C3, C4
1
4.7uF
C5
2
1.5K
R1, R2
2
5.1K
R3, R6
Show 2 more
QtyPartRefs
2
75
R4, R5
1
10k
R7

Pinstripe design files

The KiCad project lives in the null-ll/pinstripe repository on GitHub; these links point at the commit this page was built from.

Pinstripe: common questions

What microcontroller does the Pinstripe use?

The Pinstripe is built around the ATmega32A-PU, from the AVR/Arduino family.

How big is the Pinstripe PCB?

The Pinstripe measures 323.9 × 123 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pinstripe?

162 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pinstripe design files?

From the null-ll/pinstripe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pinstripe design in my own project?

Yes, under the terms of its GPL-2.0 license, which null-ll chose for the repository.

Can I test firmware for the Pinstripe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards