STM32F446RE robomas controller
nyankowan·CatchRobo_2026·Kicad/STM32F446RE_robomas_controller/STM32F446RE_robomas_controller.kicad_pcb
About the STM32F446RE robomas controller PCB
STM32F446RE robomas controller is an open source PCB design by nyankowan, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 12 components from 12 distinct parts.
Other key parts include the NUCLEO-F446RE. By type, the board carries 9 connectors, 1 IC, 1 diode and 1 resistor.
From the project
回路のデータ,複数マイコンのプログラム一括管理
キャチロボ2026で使用する回路データ(KiCad 10.0)と,その部品リスト.
各基板に対応するファームウェアは STM32/README.md および ESP32/controller/README.md を参照.
このディレクトリにあるキャチロボ2026に向けて作った回路データのほかにも, 岡ロボで使われるCANトランシーバー回路も使用している.
- robomascontroller基板×1 - nucleo-f446re - 192ピンソケット×2 - hirose 2pin(DF1EC-2P-2.5DSA(35))×7 - 5ピンソケット×2 - 300Ω抵抗×1 - φ3LED×1
- ESP Main controller基板×1 - ESP32-DevKitC-32E - 19ピンソケット×2 - 2ピンソケット×2 - 5ピンソケット×1 - φ3LED×7 - 470Ω抵抗×7
Main components on the STM32F446RE robomas controller
STM32F446RE robomas controller bill of materials (BOM)
12 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NUCLEO-F446RE | MODULE_NUCLEO-F446RE_CN11_CN12_clearance | U3 |
| 1 | UP_R | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | UP_DEG- | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | UP_DEG+ | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | LOW_R | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | LOW_DEG- | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | LOW_DEG+ | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | COMMAND_CAN | PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | ROBOMAS_CAN | PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | E5V | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Status_LED | LED_D3.0mm | D1 |
| 1 | 300R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
STM32F446RE robomas controller design files
The KiCad project lives in the nyankowan/CatchRobo_2026 repository on GitHub; these links point at the commit this page was built from.
STM32F446RE robomas controller: common questions
How big is the STM32F446RE robomas controller PCB?
The STM32F446RE robomas controller measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F446RE robomas controller?
12 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F446RE robomas controller design files?
From the nyankowan/CatchRobo_2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32F446RE robomas controller design in my own project?
The repository has no license, so all rights stay with nyankowan. Use it as a reference, and ask the author before reusing the design.