STM32F303K8 lower arm servo
nyankowan·CatchRobo_2026·Kicad/STM32F303K8_lower_arm_servo/STM32F303K8_lower_arm_servo.kicad_pcb
About the STM32F303K8 lower arm servo PCB
STM32F303K8 lower arm servo is an open source PCB design by nyankowan, published on GitHub. It is a 2-layer board measuring 46.5 × 50.5 mm, with 5 components from 5 distinct parts.
Other key parts include the NUCLEO-F303K8. By type, the board carries 2 connectors, 1 IC, 1 diode and 1 resistor.
It belongs with the robotics & motion designs in this gallery.
From the project
回路のデータ,複数マイコンのプログラム一括管理
キャチロボ2026で使用する回路データ(KiCad 10.0)と,その部品リスト.
各基板に対応するファームウェアは STM32/README.md および ESP32/controller/README.md を参照.
このディレクトリにあるキャチロボ2026に向けて作った回路データのほかにも, 岡ロボで使われるCANトランシーバー回路も使用している.
- robomascontroller基板×1 - nucleo-f446re - 192ピンソケット×2 - hirose 2pin(DF1EC-2P-2.5DSA(35))×7 - 5ピンソケット×2 - 300Ω抵抗×1 - φ3LED×1
- ESP Main controller基板×1 - ESP32-DevKitC-32E - 19ピンソケット×2 - 2ピンソケット×2 - 5ピンソケット×1 - φ3LED×7 - 470Ω抵抗×7
Main components on the STM32F303K8 lower arm servo
STM32F303K8 lower arm servo bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NUCLEO-F303K8 | NUCLEO-F303K8 | U1 |
| 1 | Servo | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | CAN | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
STM32F303K8 lower arm servo design files
The KiCad project lives in the nyankowan/CatchRobo_2026 repository on GitHub; these links point at the commit this page was built from.
STM32F303K8 lower arm servo: common questions
How big is the STM32F303K8 lower arm servo PCB?
The STM32F303K8 lower arm servo measures 46.5 × 50.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F303K8 lower arm servo?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F303K8 lower arm servo design files?
From the nyankowan/CatchRobo_2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32F303K8 lower arm servo design in my own project?
The repository has no license, so all rights stay with nyankowan. Use it as a reference, and ask the author before reusing the design.
More boards in CatchRobo_2026
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979