Servo
nyankowan·CatchRobo_2026·Kicad/servo/servo.kicad_pcb
About the Servo PCB
Servo is an open source PCB design by nyankowan, published on GitHub. It is a 2-layer board measuring 62 × 29.3 mm, with 16 components from 12 distinct parts.
By type, the board carries 7 connectors, 6 resistors, 2 capacitors and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
回路のデータ,複数マイコンのプログラム一括管理
キャチロボ2026で使用する回路データ(KiCad 10.0)と,その部品リスト.
各基板に対応するファームウェアは STM32/README.md および ESP32/controller/README.md を参照.
このディレクトリにあるキャチロボ2026に向けて作った回路データのほかにも, 岡ロボで使われるCANトランシーバー回路も使用している.
- robomascontroller基板×1 - nucleo-f446re - 192ピンソケット×2 - hirose 2pin(DF1EC-2P-2.5DSA(35))×7 - 5ピンソケット×2 - 300Ω抵抗×1 - φ3LED×1
- ESP Main controller基板×1 - ESP32-DevKitC-32E - 19ピンソケット×2 - 2ピンソケット×2 - 5ピンソケット×1 - φ3LED×7 - 470Ω抵抗×7
Servo bill of materials (BOM)
16 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | pwm | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SERVO1 servo1 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | SERVO2 servo2 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | SERVO3 servo3 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SERVO4 servo4 | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SERVO5 servo5 | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | XT30 | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | P1 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 1000μF | CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | 0.1μF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 5 | 220Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
Servo design files
The KiCad project lives in the nyankowan/CatchRobo_2026 repository on GitHub; these links point at the commit this page was built from.
Servo: common questions
How big is the Servo PCB?
The Servo measures 62 × 29.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Servo?
16 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Servo design files?
From the nyankowan/CatchRobo_2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Servo design in my own project?
The repository has no license, so all rights stay with nyankowan. Use it as a reference, and ask the author before reusing the design.
More boards in CatchRobo_2026
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979