433 mesh hw2

oh3bsg·433_mesh_hw

433 mesh hw2 PCB layout, top view — open source board by oh3bsg

About the 433 mesh hw2 PCB

433 mesh hw2 is an open source PCB design by oh3bsg, published on GitHub. It is a 2-layer board measuring 35 × 82 mm, with 5 components from 5 distinct parts.

Other key parts include the Sparkfun_Pro_Micro.

It belongs with the rf & radio designs in this gallery.

From the project

This repository contains the KiCad hardware design for a small 433 MHz LoRa mesh node.

This repository contains the KiCad hardware design for a small 433 MHz LoRa mesh node.

The board is built around: - SparkFun Pro Micro (SparkfunProMicro footprint) as the main MCU - SX1278 / RA‑02 LoRa module (LORA SX1278 RA-02 DIP 01 footprint) for 433 MHz LoRa communication - I²C pads (I2Cpads) for connecting external sensors or peripherals - UART connector (UARTconn) for serial access (RX/TX/GND) - Power connector (pwrconn) and battery pads (Bat +, Bat -`)

Main components on the 433 mesh hw2

433 mesh hw2 bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
~
U1
1
Sparkfun_Pro_Micro
U2
1
~
U6
1
~
U7
1
LORA SX1278 RA-02 DIP 01
MODULE1

433 mesh hw2 design files

The KiCad project lives in the oh3bsg/433_mesh_hw repository on GitHub; these links point at the commit this page was built from.

433 mesh hw2: common questions

How big is the 433 mesh hw2 PCB?

The 433 mesh hw2 measures 35 × 82 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 433 mesh hw2?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the 433 mesh hw2 design files?

From the oh3bsg/433_mesh_hw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the 433 mesh hw2 design in my own project?

The repository has no license, so all rights stay with oh3bsg. Use it as a reference, and ask the author before reusing the design.

More boards in 433_mesh_hw

Similar boards