ShroomShed MKII
OilyT·ShroomShedMKII·ShroomShed_MKII_PCB/ShroomShed_MKII_PCB.kicad_pcb
About the ShroomShed MKII PCB
ShroomShed MKII is an open source STM32 PCB design by OilyT, published on GitHub. It is a 4-layer board measuring 88 × 72 mm, with 86 components from 45 distinct parts.
Its main chip is the STM32H562VGTX, from the STM32 family. Other key parts include the WS2811, TPS61085DGK, USBLC6-2SC6 and AMS1117-3.3. By type, the board carries 27 capacitors, 19 resistors, 15 diodes, 11 connectors, 8 ICs and 2 switches.
Main components on the ShroomShed MKII
ShroomShed MKII bill of materials (BOM)
86 components, 45 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | WS2811 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U5, U6 |
| 1 | TPS61085DGK | VSSOP-8_3x3mm_P0.65mm | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | STM32H562VGTX STM32H562VGTx | LQFP-100_14x14mm_P0.5mm | U8 |
| 1 | BC817 | SOT-23 | Q1 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J1 |
| 1 | GPIO_1 | PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | GPIO_2 | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | 3V3_PWR | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | 5V_PWR | PinHeader_2x02_P2.54mm_Vertical | J5 |
| 1 | 12V_PWR | PinHeader_2x02_P2.54mm_Vertical | J6 |
| 1 | SHT31 | JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal | J7 |
| 1 | ERM | JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal | J8 |
| 1 | SWD 14 pin header | PinHeader_2x07_P1.27mm_Vertical_SMD | J9 |
| 1 | SD_SPI | PinSocket_1x04_P2.54mm_Vertical | J10 |
| 1 | Display_Touch_SPI | PinSocket_1x14_P2.54mm_Vertical | J11 |
| 1 | 750MA 750mA | Fuse_1210_3225Metric_Pad1.42x2.65mm_HandSolder | F1 |
| 1 | EVQ-Q2B03W | EVQQ2_3_PAN | SW1 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BOOT SELECT | SW_SPDT_Shouhan_MSK12C02 | SW2 |
| 12 | XL-5050RGBC | LED_RGB_5050-6 | D1, D2, D3, D4, D5, D6, D8, D9 +4 |
| 1 | SS12 | D_SMA | D7 |
| 1 | BLUE | LED_D4.0mm | D14 |
| 1 | RED | LED_0603_1608Metric | D15 |
| 1 | 4.7UH 4.7uH | L_7.3x7.3_H4.5 | L1 |
| 3 | 10UF 10uF | C_0603_1608Metric | C1, C9, C10 |
| 6 | 1UF 1uF | C_0603_1608Metric | C2, C3, C4, C7, C8, C24 |
| 9 | 100NF 100nF | C_0603_1608Metric | C5, C11, C20, C21, C22, C23, C25, C26 +1 |
| 1 | 1.1NF 1.1nF | C_0603_1608Metric | C6 |
| 2 | 12PF 12pF | C_0603_1608Metric | C12, C13 |
| 1 | 220UF 220uF | CP_Elec_6.3x5.4 | C14 |
| 2 | 22UF 22uF | C_0805_2012Metric | C15, C16 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C17, C18 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C19 |
| 2 | 33R 33r | R_0603_1608Metric | R1, R16 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R2, R6 |
| 4 | 4K7 4k7 | R_0603_1608Metric | R3, R4, R10, R11 |
| 1 | 51K 51k | R_0603_1608Metric | R5 |
| 1 | 100K 100k | R_0603_1608Metric | R7 |
| 1 | 18K 18k | R_0603_1608Metric | R8 |
| 1 | 56K 56k | R_0603_1608Metric | R9 |
| 4 | 10K 10k | R_0603_1608Metric | R12, R15, R17, R18 |
| 2 | 1k | R_0603_1608Metric | R13, R19 |
| 1 | 500R 500r | R_0603_1608Metric | R14 |
ShroomShed MKII design files
The KiCad project lives in the OilyT/ShroomShedMKII repository on GitHub; these links point at the commit this page was built from.
ShroomShed MKII: common questions
What microcontroller does the ShroomShed MKII use?
The ShroomShed MKII is built around the STM32H562VGTX, from the STM32 family.
How big is the ShroomShed MKII PCB?
The ShroomShed MKII measures 88 × 72 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ShroomShed MKII?
86 components, from 45 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ShroomShed MKII design files?
From the OilyT/ShroomShedMKII repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ShroomShed MKII design in my own project?
The repository has no license, so all rights stay with OilyT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ShroomShed MKII without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ShroomShedMKII
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k