ShroomShed Sensor
OilyT·ShroomShedMKII·ShroomShed_MKII_PCB/ShroomShed_Sensor/ShroomShed_Sensor.kicad_pcb
About the ShroomShed Sensor PCB
ShroomShed Sensor is an open source PCB design by OilyT, published on GitHub. It is a 2-layer board measuring 25.3 × 27.9 mm, with 10 components from 8 distinct parts.
Other key parts include the SHT31-DIS and SCD40-D-R2. By type, the board carries 3 capacitors, 3 resistors, 2 ICs, 1 connector and 1 diode.
It belongs with the sensors designs in this gallery.
Main components on the ShroomShed Sensor
ShroomShed Sensor bill of materials (BOM)
10 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SHT31-DIS | Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U1 |
| 1 | SCD40-D-R2 | Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm | U2 |
| 1 | CONN_01X04 Conn_01x04 | JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J1 |
| 1 | RED | LED_0603_1608Metric | D1 |
| 2 | 100NF 100nF | C_0603_1608Metric | C1, C3 |
| 1 | 100nF (XR5 / XR7) | C_0603_1608Metric | C2 |
| 2 | 10K 10k | R_0603_1608Metric | R1, R2 |
| 1 | 1K | R_0603_1608Metric | R3 |
ShroomShed Sensor design files
The KiCad project lives in the OilyT/ShroomShedMKII repository on GitHub; these links point at the commit this page was built from.
ShroomShed Sensor: common questions
How big is the ShroomShed Sensor PCB?
The ShroomShed Sensor measures 25.3 × 27.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ShroomShed Sensor?
10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ShroomShed Sensor design files?
From the OilyT/ShroomShedMKII repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ShroomShed Sensor design in my own project?
The repository has no license, so all rights stay with OilyT. Use it as a reference, and ask the author before reusing the design.
More boards in ShroomShedMKII
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956