HardLabs

Firmware tester board 2

olin-electric-motorsports·olin-electric-motorsports·projects/hitl/firmware_tester_board/firmware_tester_board 2.kicad_pcb

Firmware tester board 2 layout, top view — open source AVR/Arduino board by olin-electric-motorsports

About the Firmware tester board 2

Firmware tester board 2 is an open source AVR/Arduino PCB design by olin-electric-motorsports, published on GitHub. It is a 2-layer board measuring 49.9 × 75.4 mm, with 58 components from 23 distinct parts.

Its main chip is the ATMEGA16M1-AU-ND, from the AVR/Arduino family. Other key parts include the AP7370-50W5-7DICT-ND and MCP2561-E/SN-ND. By type, the board carries 26 resistors, 14 connectors, 7 capacitors, 3 ICs, 3 test points and 2 diodes.

From the project

OEM Monorepo

The projects/ directory will house projects that are under active and volatile development. This will include things like advanced research projects that won't make it onto the vehicle during the current season, as well as projects that are parallel to the car, like the HIL system.

Once a car-related project has matured enough, it will be moved into the vehicle/ directory, where development may continue to integrate it into the vehicle of the season.

Main components on the Firmware tester board 2

ATMEGA16M1-AU-NDAP7370-50W5-7DICT-NDMCP2561-E/SN-ND

Firmware tester board 2 bill of materials (BOM)

58 components, 23 distinct parts.

QtyPartRefs
1
ATMEGA16M1-AU-ND
ATMEGA64M1
U0
1
AP7370-50W5-7DICT-ND
AP7370
U2
1
MCP2561-E/SN-ND
MCP2561-E_SN
U3
1
SSM3K333RLFCT-ND
SSM3K333R
Q1
1
887-1125-1-ND
Crystal_SMD
Y1
10
855-M20-9990346
CONN_01X03
J1, J2, J3, J4, J5, J6, J7, J8 +2
1
Screw_Terminal_01x03
J11
1
61304421121
SSW-122-01-G-D
J12
1
609-3234-ND
CONN_02X03
J13
1
732-5315-ND
CONN_01x02
J14
1
SW1020CT-ND
SW_Push_SPST_NO
SW1
3
Test_Point_SMD
TP1, TP2, TP3
2
475-1410-1-ND
LED_0805
D1, D2
2
478-3352-1-ND
C_0.1uF
C1, C7
1
732-7852-1-ND
C_100pF
C2
2
1276-1130-1-ND
C_30pF
C3, C4
2
C_1uF
C5, C6
20
RNCP0805FTD100RCT-ND
R_100
R1, R8, R9, R10, R11, R12, R13, R14 +12
2
CRS0805-FX-1002ELFCT-ND
R_10K
R2, R7
1
RNCP0805FTD1K00CT-ND
R_1K
R3
Show 3 more
QtyPartRefs
1
RMCF0805JT200RCT-ND
R_200
R4
1
A121322CT-ND
R_0_2512
R5
1
667-ERJ-6ENF1200V
R_120
R6

Firmware tester board 2 design files

The KiCad project lives in the olin-electric-motorsports/olin-electric-motorsports repository on GitHub; these links point at the commit this page was built from.

Firmware tester board 2: common questions

What microcontroller does the Firmware tester board 2 use?

The Firmware tester board 2 is built around the ATMEGA16M1-AU-ND, from the AVR/Arduino family.

How big is the Firmware tester board 2?

The Firmware tester board 2 measures 49.9 × 75.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Firmware tester board 2?

58 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Firmware tester board 2 design files?

From the olin-electric-motorsports/olin-electric-motorsports repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Firmware tester board 2 design in my own project?

The repository has no license, so all rights stay with olin-electric-motorsports. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Firmware tester board 2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in olin-electric-motorsports

Similar boards