LED-Coaster
Olivermoberg98·LED-Coaster·Hardware/PCB/LED_Coaster.kicad_pcb
About the LED-Coaster PCB
LED-Coaster is an open source ESP32 PCB design by Olivermoberg98, published on GitHub under the MIT license. It is a 2-layer board measuring 90 × 90 mm, with 81 components from 25 distinct parts.
Its main chip is the C2944070, from the ESP32 family. Other key parts include the C5121473 and C404027. By type, the board carries 31 diodes, 21 capacitors, 17 resistors, 3 ICs, 3 connectors and 1 transistor.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
Battery-powered RGB LED drink coaster: ESP32-C3 firmware, Android BLE app, KiCad PCB and 3D-printed enclosure
KiCad 10 project for the coaster board: a 90 mm round, two-layer board with an ESP32-C3 module, a Li-Po charger with power path, and two rings of WS2812-compatible LEDs, 10 on the front and 20 on the back.
Power path. USB-C 5 V feeds the MCP73871 charger U3, which powers the system rail +SYS from USB or the cell and charges the cell at 500 mA. SW1 drives the gate of the P-FET Q1, which switches +SYS onto +LEDPWR for the LEDs. The 3.3 V LDO U4 takes its enable from +LEDPWR, so switching SW1 off powers down the ESP32 as well. Charging still works with SW1 off, because U3 sits upstream of the…
Main components on the LED-Coaster
LED-Coaster bill of materials (BOM)
81 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2944070 ESP32-C3-WROOM-02-H4 | MODULE_ESP32-C3-WROOM-02-H4 | U1 |
| 1 | C5121473 MCP73871-2CC | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U3 |
| 1 | C404027 TLV75533PDBVR | SOT-23-5 | U4 |
| 1 | C15127 AO3401A | SOT-23 | Q1 |
| 1 | Li-po | JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | C165948 USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 2 | C318884 button | SW_SPST_SKQG_WithStem | Btn1, Btn2 |
| 1 | C318884 Boot | SW_SPST_SKQG_WithStem | Btn3 |
| 1 | C318884 Enable | SW_SPST_SKQG_WithStem | Btn4 |
| 1 | C221660 SW_SPDT | SW_SPDT_CK_JS102011SAQN | SW1 |
| 30 | C26167850 WS2812B | LED_WS2812_5050_handsolder | D1, D2, D3, D4, D5, D6, D7, D8 +22 |
| 1 | C2297 LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D34 |
| 6 | C1779 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5, C6, C7 |
| 2 | C28233 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C21 |
| 12 | C14663 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C9, C10, C11, C12, C13, C14, C15 +4 |
| 1 | C380336 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 4 | C17414 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R14 |
| 1 | C17604 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | C27834 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C17513 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R12 |
| 2 | C17561 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11 |
| 2 | C149504 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R17 |
| 1 | C4328 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 2 | C17709 470k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19 |
LED-Coaster design files
The KiCad project lives in the Olivermoberg98/LED-Coaster repository on GitHub; these links point at the commit this page was built from.
LED-Coaster: common questions
What microcontroller does the LED-Coaster use?
The LED-Coaster is built around the C2944070, from the ESP32 family.
How big is the LED-Coaster PCB?
The LED-Coaster measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LED-Coaster?
81 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LED-Coaster design files?
From the Olivermoberg98/LED-Coaster repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LED-Coaster design in my own project?
Yes, under the terms of its MIT license, which Olivermoberg98 chose for the repository.
Can I test firmware for the LED-Coaster without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k