3-Bit-Counter
omersoner-dev·3-Bit-Counter
About the 3-Bit-Counter PCB
3-Bit-Counter is an open source PCB design by omersoner-dev, published on GitHub. It is a board, with 25 components from 13 distinct parts.
Other key parts include the 74LS73, NE555P, 74LS48 and HDSP-7403. By type, the board carries 12 resistors, 5 ICs, 3 diodes, 3 capacitors and 1 switch.
From the project
This repository contains the schematic design of a 3-bit asynchronous (ripple) up-counter developed using KiCad. The system utilizes sequential digital logic components to achieve stable binary counting from 000 to 111 (0 to 7 in decimal) with real-time frequency control and sync
This repository contains the schematic design of a 3-bit asynchronous (ripple) up-counter developed using KiCad. The system utilizes sequential digital logic components to achieve stable binary counting from 000 to 111 (0 to 7 in decimal) with real-time frequency control and synchronous/asynchronous system reset capabilities.
- Sequential Logic Core: Implemented using negative-edge triggered J-K Flip-Flops configured in toggle mode. - Adjustable Clock Source: Driven by an NE555 timer configured in astable multivibrator mode, offering precise frequency tuning via a potentiometer. - Visual…
Main components on the 3-Bit-Counter
3-Bit-Counter bill of materials (BOM)
25 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74LS73 | U1, U2 | |
| 1 | NE555P | DIP-8_W7.62mm | U3 |
| 1 | 74LS48 | U4 | |
| 1 | HDSP-7403 | AD-121F2 | U5 |
| 1 | 50k | RV1 | |
| 1 | SW_Push | SW1 | |
| 3 | LED | D1, D2, D3 | |
| 1 | 47u | C1 | |
| 1 | 100n | C3 | |
| 1 | 100u | C4 | |
| 1 | 1k | R1 | |
| 10 | 330 | R2, R3, R4, R5, R6, R7, R8, R9 +2 | |
| 1 | 10k | R12 |
3-Bit-Counter design files
The KiCad project lives in the omersoner-dev/3-Bit-Counter repository on GitHub; these links point at the commit this page was built from.
- Schematic3 Bit Counter.kicad_sch
3-Bit-Counter: common questions
How many components are on the 3-Bit-Counter?
25 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3-Bit-Counter design files?
From the omersoner-dev/3-Bit-Counter repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the 3-Bit-Counter design in my own project?
The repository has no license, so all rights stay with omersoner-dev. Use it as a reference, and ask the author before reusing the design.