10 open source boards using the 74LS73
Real designs built with the 74LS73, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20RC6802 UI
tebl
99.1 × 86.4 mm80 parts2LCERN-OHL-1.26Preperf 10x10 V1
ApophisXIV
100 × 100 mm1359 parts8LNo license2DigitalTimer
Bican-Valeriu-Cristian
82 × 84 mm35 parts2LMIT1ElectronicClock
Aniruddha-Deb
275.6 × 166.4 mm91 parts2LNo license0DigitalTimer
CurcanRazvan
82 × 84 mm34 parts2LNo license0- schematic only · 25 parts
3-Bit-Counter
omersoner-dev
25 partsNo license0 Educ 8 timing
ibm2030
220 × 159.9 mm45 parts4LNo license13ACE-COLOUR2
flypie
165.1 × 114.3 mm95 parts2LGPL-3.013Show Carnet
EmersonEE
150 × 100 mm20 parts2LNo license0
How designs wire the 74LS73
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74LS73 connects to, and the resistors, capacitors and other passives placed on it.
- The K pins is tied to VCC on 61% of them (not connected on 3, a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Kpin 3, 10 | Connected to: VCC 61% · not connected 17% · a signal 17% | — |
| VCCpin 4 | Connected to: VCC 100% | — |
| GNDpin 11 | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fennec6800 by ChartreuseK, ACE-COLOUR2 by flypie, Educ 8 timing by ibm2030 and RC6802 UI by tebl.
The 74LS73 in open source designs
The gallery holds 10 open source boards using the 74LS73 from 10 GitHub repositories; a typical one measures about 150 × 100 mm and carries around 63 components.
78% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Fennec6800 by ChartreuseK.
Parts used alongside the 74LS73
What boards using the 74LS73 are built for
74LS73: common questions
Where can I find a 74LS73 reference design?
Each of the 10 boards on this page is a real design using the 74LS73. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS73 K pin connected?
The K pins is tied to VCC on 61% of them (not connected on 3, a signal on 3). Counted from the KiCad layouts of 9 open source designs using the 74LS73.
What parts are used alongside the 74LS73?
The 74LS08, 4511, 74LS00, 74LS04 and 74LS193 appear in the most repositories here.
How big is a typical board using the 74LS73?
The median is 150 × 100 mm, and 78% are two-layer designs.
What is the most popular open source board using the 74LS73?
By GitHub stars, Fennec6800 by ChartreuseK, with 20 stars.
Can I simulate one of these boards using the 74LS73 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.