9 open source boards using the 74LS48
Real designs built with the 74LS48, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
EduBoard PIC16
hassan-ibn-mustafa
193.5 × 141 mm72 parts2LNo license1TriBit-Lux
XEMACS-666
80 × 41 mm57 parts2LNo license0Circuits
oselcukyatagan
157 × 31.8 mm33 parts2LNo license0ESP32
OpenRockTumbler
agmlego
120 × 44 mm28 parts2LNo license024-Second Counter
shannadale
77.5 × 70.5 mm28 parts2LMIT024-Second Counter
teya1018
76 × 64 mm28 parts2LMIT024-Second Counter
gg-orozco
82.5 × 70 mm28 parts2LMIT0- schematic only · 25 parts
3-Bit-Counter
omersoner-dev
25 partsNo license0 ServicetastaturWeissFake
stonedDiscord
153.7 × 67.3 mm43 parts2LBSD-2-Clause5
How designs wire the 74LS48
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74LS48 connects to, and the resistors, capacitors and other passives placed on it.
- The B pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω).
- The C pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω).
- The D pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω).
- The A pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Bpin 1, 12 | Connected to: Signal 100% |
|
| Cpin 2, 11 | Connected to: Signal 94% |
|
| LTpin 3 | Connected to: 5V 75% | — |
| BIpin 4 | Connected to: 5V 63% · a signal 25% | — |
| RBIpin 5 | Connected to: 5V 63% · GND 25% | — |
| Dpin 6, 10 | Connected to: Signal 88% |
|
| Apin 7, 13 | Connected to: Signal 100% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| Epin 9 | Connected to: Signal 100% |
|
| Gpin 14 | Connected to: Signal 100% |
|
| Fpin 15 | Connected to: Signal 100% |
|
| VCCpin 16 | Connected to: 5V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ServicetastaturWeissFake by stonedDiscord, EduBoard PIC16 by hassan-ibn-mustafa, OpenRockTumbler by agmlego and 24-Second Counter by gg-orozco.
The 74LS48 in open source designs
The gallery holds 9 open source boards using the 74LS48 from 9 GitHub repositories; a typical one measures about 101.3 × 65.7 mm and carries around 28 components.
100% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is ServicetastaturWeissFake by stonedDiscord.
Parts used alongside the 74LS48
What boards using the 74LS48 are built for
74LS48: common questions
Where can I find a 74LS48 reference design?
Each of the 9 boards on this page is a real design using the 74LS48. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the 74LS48 B pin?
The B pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω). Counted from the KiCad layouts of 8 open source designs using the 74LS48.
What resistor goes on the 74LS48 C pin?
The C pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω). Counted from the KiCad layouts of 8 open source designs using the 74LS48.
What resistor goes on the 74LS48 D pin?
The D pins have a series resistor on 7 of 8 designs, most often 100 Ω (then 220 Ω). Counted from the KiCad layouts of 8 open source designs using the 74LS48.
Which microcontrollers do boards using the 74LS48 use?
Most are built on ESP32 (1) and PIC (1).
How big is a typical board using the 74LS48?
The median is 101.3 × 65.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS48?
By GitHub stars, ServicetastaturWeissFake by stonedDiscord, with 5 stars.
Can I simulate one of these boards using the 74LS48 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.