Survibank
Onaensar·Survibank·Hardware/KiCad_Project/POWERBANK_CLEAN2.kicad_pcb
About the Survibank PCB
Survibank is an open source PCB design by Onaensar, published on GitHub. It is a 2-layer board measuring 92 × 110.6 mm, with 65 components from 44 distinct parts.
Other key parts include the IP5328 and CN3791. By type, the board carries 28 capacitors, 14 resistors, 10 diodes, 3 ICs, 2 connectors and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Hybrid Powerbank: Solar + MagSafe + 18W Fast Charge
Main components on the Survibank
Survibank bill of materials (BOM)
65 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP5328 | QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm | U1 |
| 1 | CN3791 | SSOP-10_3.9x4.9mm_P1.00mm | U2 |
| 1 | ~ | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RU20P7C | SOT-23 | Q3 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | Battery_Cell | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | BT1 |
| 1 | TERMINAL_KF235-5.0-2P | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | K1 |
| 1 | SW_Push | SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | 100k@25c | R_0805_2012Metric | TH1 |
| 1 | 10k | PinHeader_1x02_P2.54mm_Vertical | TH2 |
| 5 | LED | LED_0603_1608Metric | D1, D2, D3, D4, D5 |
| 1 | Green | LED_0805_2012Metric | D6 |
| 1 | Red | LED_0805_2012Metric | D7 |
| 1 | AOD4185 | TO-252-2 | D8 |
| 1 | RBR5LAM30ATFTR | D_SMB | D9 |
| 1 | LED | LED_0805_2012Metric | D10 |
| 1 | 2.2uh | L_12x12mm_H4.5mm | L1 |
| 1 | YPRH1209-470M | L_12x12mm_H4.5mm | L2 |
| 2 | 10u | C_0805_2012Metric | C1, C22 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1u | C_0805_2012Metric | C2 |
| 2 | 10uf 25v | C_1206_3216Metric | C3, C17 |
| 2 | C_Polarized_Small | CP_Elec_4x5.7 | C4, C23 |
| 2 | 2.2uf 16v | C_0805_2012Metric | C5, C6 |
| 2 | 22uf 25v | C_1206_3216Metric | C7, C15 |
| 3 | 100nf 25v | C_0603_1608Metric | C8, C9, C11 |
| 3 | 22uf 25v | C_0805_2012Metric | C10, C12, C13 |
| 4 | 22uf 16v | C_1206_3216Metric | C14, C16, C18, C19 |
| 1 | 100n | C_0805_2012Metric | C20 |
| 1 | 220n | C_0805_2012Metric | C21 |
| 1 | 10uF | C_0805_2012Metric | C24 |
| 4 | 100nF | C_0805_2012Metric | C25, C26, C27, C28 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 1 | 10k | R_0603_1608Metric | R2 |
| 1 | 4k7 | R_0805_2012Metric | R3 |
| 1 | 0.01R | R_1206_3216Metric | R4 |
| 1 | 82k 1% | R_0603_1608Metric | R5 |
| 1 | 114k | R_0603_1608Metric | R6 |
| 3 | 100R | R_0603_1608Metric | R7, R8, R9 |
| 1 | NC | R_0603_1608Metric | R10 |
| 1 | 120R | R_0805_2012Metric | R11 |
| 1 | 62k | R_0805_2012Metric | R12 |
| 1 | 40m | R_0805_2012Metric | R13 |
| 1 | 330 | R_0805_2012Metric | R14 |
Survibank design files
The KiCad project lives in the Onaensar/Survibank repository on GitHub; these links point at the commit this page was built from.
Survibank: common questions
How big is the Survibank PCB?
The Survibank measures 92 × 110.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Survibank?
65 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the Survibank design files?
From the Onaensar/Survibank repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Survibank design in my own project?
The repository has no license, so all rights stay with Onaensar. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k