Custom-High-Quality-Crossover
ond3raa·Custom-High-Quality-Crossover·PCB/Crossover.kicad_pcb
About the Custom-High-Quality-Crossover PCB
Custom-High-Quality-Crossover is an open source PCB design by ond3raa, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 9 components from 6 distinct parts.
It belongs with the audio designs in this gallery.
From the project
I selected these models based on their physical dimensions (length and width) to verify component clearance and PCB seating. The actual high-quality audio components (inductors and capacitors) used for assembly are precisely specified in the Bill of Materials.

Custom-High-Quality-Crossover bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L | DEXON vzduchová cívka 0,8mm | 0.33mH_L1 |
| 1 | L | MONACOR LSIP-472 | 0.47mH_L2 |
| 1 | C | MONACOR MKPA-68 | 6.8µ_C2 |
| 1 | C | MONACOR MKPA-82 | 8.2µ_C1 |
| 3 | Conn_01x02_Pin | Konektor připojovací | INPUT1, Tweeter1, Woofer1 |
| 2 | R | Rezistor keramický | R1, R2 |
Custom-High-Quality-Crossover design files
The KiCad project lives in the ond3raa/Custom-High-Quality-Crossover repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Crossover.kicad_pcb
- SchematicPCB/Crossover.kicad_sch
- BOMBOM.csv
Custom-High-Quality-Crossover: common questions
How big is the Custom-High-Quality-Crossover PCB?
The Custom-High-Quality-Crossover measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Custom-High-Quality-Crossover?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Custom-High-Quality-Crossover design files?
From the ond3raa/Custom-High-Quality-Crossover repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Custom-High-Quality-Crossover design in my own project?
Yes, under the terms of its MIT license, which ond3raa chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687