Dps368-breakout
open-thngs·dps368-breakout·pcb/dps368-breakout.kicad_pcb
About the Dps368-breakout
Dps368-breakout is an open source PCB design by open-thngs, published on GitHub. It is a 2-layer board measuring 13.7 × 18.7 mm, with 7 components from 5 distinct parts.
Other key parts include the DPS368XTSA1. By type, the board carries 3 resistors, 2 capacitors, 1 IC and 1 connector.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Breakout board for the Infineon DPS368 pressure sensor (I2C)
This repository provides different CI/CD workflows used for projects using KiCAD and PlatformIO.
KiBot is used to generate all kind of documentation from a KiCAD6 project.
Whenever a file matching pcb/.kicad_*` changes this workflow will trigger.
The following documents are generated on every build:
used to rebuild your source code whenever it changes.
used to insure every file got a propper license.
Main components on the Dps368-breakout
Dps368-breakout bill of materials (BOM)
7 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DPS368XTSA1 | XDCR_DPS368XTSA1 | U1 |
| 1 | Conn_01x05_Pin | PinSocket_1x05_P2.54mm_Vertical | J1 |
| 2 | 0.1uF | C_0603_1608Metric | C1, C2 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 2 | 10k | R_0603_1608Metric | R2, R3 |
Dps368-breakout design files
The KiCad project lives in the open-thngs/dps368-breakout repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/dps368-breakout.kicad_pcb
- Schematicpcb/dps368-breakout.kicad_sch
Dps368-breakout: common questions
How big is the Dps368-breakout?
The Dps368-breakout measures 13.7 × 18.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dps368-breakout?
7 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dps368-breakout design files?
From the open-thngs/dps368-breakout repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dps368-breakout design in my own project?
The repository has no license, so all rights stay with open-thngs. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k