Diy oled 3d controller
About the Diy oled 3d controller PCB
Diy oled 3d controller is an open source PCB design by open3doled, published on GitHub under the Custom license license. It is a 2-layer board measuring 37.5 × 99 mm, with 36 components from 14 distinct parts.
Other key parts include the OPT101P and MCP6022-I_SN. By type, the board carries 10 diodes, 8 resistors, 4 switches, 4 capacitors, 3 ICs and 3 connectors.
It belongs with the displays & leds designs in this gallery.
From the project
If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3d_player.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom "Change high DPI settings" 3) At the very bottom check the box n
If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3d_player.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom "Change high DPI settings" 3) At the very bottom check the box next to the text "Override high DPI scaling behavior. Scaling performed: Application" 4) Click OK on this sub dialog as well as the parent one
Main components on the Diy oled 3d controller
Diy oled 3d controller bill of materials (BOM)
36 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPT101P | DIP762W46P254L952H419Q8 | U1, U2 |
| 1 | MCP6022-I_SN | SOIC127P599X175-8N | U4 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 3 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1, J2, J3 |
| 1 | SPARKFUN_PRO_MICRO | SPARKFUN_PRO_MICRO | B1 |
| 1 | Polyfuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 4 | TL3342F160QG | SW_TL3342F160QG | S1, S2, S3, S4 |
| 8 | LED | LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D1, D2, D3, D4, D11, D12, D13, D14 |
| 2 | VBPW34S | XDCR_VBPW34S | D9, D10 |
| 2 | C_Polarized | C_Radial_D6.3mm_H11.0mm_P2.50mm | C1, C2 |
| 2 | 47pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 1000 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4 |
| 2 | 510k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 4 | 1.5 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R10, R11, R12, R13 |
Diy oled 3d controller design files
The KiCad project lives in the open3doled/open-3d-oled repository on GitHub; these links point at the commit this page was built from.
Diy oled 3d controller: common questions
How big is the Diy oled 3d controller PCB?
The Diy oled 3d controller measures 37.5 × 99 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diy oled 3d controller?
36 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Diy oled 3d controller design files?
From the open3doled/open-3d-oled repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Diy oled 3d controller design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
atopile
AxxAxx
eez-open