Sensor emitter board

open3doled·open-3d-oled·3DIREmitterHardware/v2.2b/sensor_emitter_board/sensor_emitter_board.kicad_pcb

Sensor emitter board layout, top view — open source board by open3doled

Simulate this board

About the Sensor emitter board

Sensor emitter board is an open source PCB design by open3doled, published on GitHub under the Custom license license. It is a 2-layer board measuring 26 × 23.5 mm, with 7 components from 5 distinct parts.

Other key parts include the MCP6022-I_SN. By type, the board carries 3 resistors, 2 capacitors, 1 IC and 1 transistor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3d_player.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom "Change high DPI settings" 3) At the very bottom check the box n

If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3d_player.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom "Change high DPI settings" 3) At the very bottom check the box next to the text "Override high DPI scaling behavior. Scaling performed: Application" 4) Click OK on this sub dialog as well as the parent one

Main components on the Sensor emitter board

Sensor emitter board bill of materials (BOM)

7 components, 5 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	MCP6022-I_SN	SOIC127P599X175-8N	U4
1	AO3400A	SOT-23	Q1
2	47PF 47pF	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C3, C4
1	1000	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1
2	510K 510k	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R2, R3

Sensor emitter board design files

The KiCad project lives in the open3doled/open-3d-oled repository on GitHub; these links point at the commit this page was built from.

Sensor emitter board: common questions

How big is the Sensor emitter board?

The Sensor emitter board measures 26 × 23.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sensor emitter board?

7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sensor emitter board design files?

From the open3doled/open-3d-oled repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sensor emitter board design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in open-3d-oled

Similar boards