Microcontroller board
open3doled·open-3d-oled·3DIREmitterHardware/v2.2b/microcontroller_board/microcontroller_board.kicad_pcb
About the Microcontroller board
Microcontroller board is an open source PCB design by open3doled, published on GitHub under the Custom license license. It is a 2-layer board measuring 37.5 × 50 mm, with 13 components from 6 distinct parts.
By type, the board carries 4 switches, 4 resistors, 2 capacitors, 1 connector and 1 fuse.
It belongs with the displays & leds designs in this gallery.
From the project
If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3d_player.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom "Change high DPI settings" 3) At the very bottom check the box n
If running windows 11 or 10 with DPI scaling be sure to disable it as follows. 1) Right click properties on 3d_player.exe in the 3DPlayer folder 2) Click on "Compatability" tab then click on the button at the bottom "Change high DPI settings" 3) At the very bottom check the box next to the text "Override high DPI scaling behavior. Scaling performed: Application" 4) Click OK on this sub dialog as well as the parent one
Microcontroller board bill of materials (BOM)
13 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SPARKFUN_PRO_MICRO | SPARKFUN_PRO_MICRO | B1 |
| 1 | Polyfuse | Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 4 | TL3342F160QG | SW_TL3342F160QG | S1, S2, S3, S4 |
| 2 | C_Polarized | C_Radial_D6.3mm_H11.0mm_P2.50mm | C1, C2 |
| 4 | 1.5 | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R10, R11, R12, R13 |
Microcontroller board design files
The KiCad project lives in the open3doled/open-3d-oled repository on GitHub; these links point at the commit this page was built from.
Microcontroller board: common questions
How big is the Microcontroller board?
The Microcontroller board measures 37.5 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Microcontroller board?
13 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Microcontroller board design files?
From the open3doled/open-3d-oled repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Microcontroller board design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in open-3d-oled
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k