HardLabs

REG1-App-Universal

OpenKNX·OpenKNX-REG1·hardware/EDA-Files/REG1-App-Universal/REG1-App-Universal.kicad_pcb

REG1-App-Universal PCB layout, top view — open source board by OpenKNX
Simulate this board

About the REG1-App-Universal PCB

REG1-App-Universal is an open source PCB design by OpenKNX, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 83 × 32.8 mm, with 4 components from 3 distinct parts.

From the project

see Wiki: https://github.com/OpenKNX/OpenKNX/wiki/OpenKNX-REG1

REG1-App-Universal bill of materials (BOM)

4 components, 3 distinct parts.

QtyPartRefs
1
REG1_App_Connector
J1
1
REG1_App_Breadboard
J3
2
Conn_01x06
J10, J20

REG1-App-Universal design files

The KiCad project lives in the OpenKNX/OpenKNX-REG1 repository on GitHub; these links point at the commit this page was built from.

REG1-App-Universal: common questions

How big is the REG1-App-Universal PCB?

The REG1-App-Universal measures 83 × 32.8 mm, has 2 copper layers and is 0.8 mm thick.

How many components are on the REG1-App-Universal?

4 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the REG1-App-Universal design files?

From the OpenKNX/OpenKNX-REG1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the REG1-App-Universal design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in OpenKNX-REG1