REG1-App-SEN-Multi
About the REG1-App-SEN-Multi PCB
REG1-App-SEN-Multi is an open source PCB design by OpenKNX, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 83 × 32.8 mm, with 23 components from 12 distinct parts.
Other key parts include the USBLC6-2SC6 and CA-IS3644. By type, the board carries 9 resistors, 5 capacitors, 4 connectors, 3 ICs and 2 diodes.
From the project
see Wiki: https://github.com/OpenKNX/OpenKNX/wiki/OpenKNX-REG1
Main components on the REG1-App-SEN-Multi
REG1-App-SEN-Multi bill of materials (BOM)
23 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | USBLC6-2SC6 | SOT-23-6 | U10, U11 |
| 1 | CA-IS3644 | WSOIC-16_L10.3-W7.5-P1.27-LS10.3-BL | U20 |
| 1 | REG1_App_Connector | PinHeader_1x10_P2.54mm_Horizontal | J1 |
| 2 | RJ22 | RJ22 | J10, J11 |
| 1 | Conn_01x06 | PhoenixContact_MC_1,5_6-G-3.5_1x06_P3.50mm_Horizontal | J20 |
| 2 | SM05C | SOT-23 | D20, D21 |
| 2 | 10uF/6.3V | C_0402_1005Metric | C20, C24 |
| 2 | 100nF | C_0402_1005Metric | C21, C23 |
| 1 | 1uF/25V | C_0402_1005Metric | C22 |
| 3 | 100 | R_0603_1608Metric | R20, R21, R22 |
| 3 | 470 | R_0603_1608Metric | R23, R24, R25 |
| 3 | 860 | R_0603_1608Metric | R26, R27, R28 |
REG1-App-SEN-Multi design files
The KiCad project lives in the OpenKNX/OpenKNX-REG1 repository on GitHub; these links point at the commit this page was built from.
REG1-App-SEN-Multi: common questions
How big is the REG1-App-SEN-Multi PCB?
The REG1-App-SEN-Multi measures 83 × 32.8 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the REG1-App-SEN-Multi?
23 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the REG1-App-SEN-Multi design files?
From the OpenKNX/OpenKNX-REG1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the REG1-App-SEN-Multi design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in OpenKNX-REG1
RP2040/RP2350REG1-IpController2040
83.2 × 15.7 mm86 parts4LCC-BY-NC-4.09
REG1-App-Eth
83 × 32.8 mm58 parts2LCC-BY-NC-4.09
RP2040/RP2350REG1-Controller2040
83.2 × 15.7 mm46 parts2LCC-BY-NC-4.09
REG1-App-SA-4xSELV
83 × 32.8 mm44 parts2LCC-BY-NC-4.09
REG1-App-GW-RS485
83 × 32.8 mm33 parts2LCC-BY-NC-4.09
REG1-App-Dali
83 × 32.8 mm26 parts2LCC-BY-NC-4.09
NanoDCU
17 × 18 mm25 parts2LCC-BY-NC-4.09
REG1-App-2xDALI
83 × 32.8 mm23 parts2LCC-BY-NC-4.09
REG1-Front-RGB
28.5 × 52.8 mm17 parts2LCC-BY-NC-4.09
REG1-Front-Universal
15.7 × 42.8 mm15 parts2LCC-BY-NC-4.09
REG1-App-Universal
83 × 32.8 mm4 parts2LCC-BY-NC-4.09