REG1-App-GW-RS485
About the REG1-App-GW-RS485 PCB
REG1-App-GW-RS485 is an open source PCB design by OpenKNX, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 83 × 32.8 mm, with 33 components from 16 distinct parts.
Other key parts include the LTV-217-B-G and IS2092VW. By type, the board carries 14 resistors, 6 capacitors, 5 ICs, 3 connectors, 3 diodes and 1 jumper.
From the project
see Wiki: https://github.com/OpenKNX/OpenKNX/wiki/OpenKNX-REG1
Main components on the REG1-App-GW-RS485
REG1-App-GW-RS485 bill of materials (BOM)
33 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | LTV-217-B-G | SOP-4_4.4x2.6mm_P1.27mm | U50, U51, U52, U53 |
| 1 | IS2092VW | SOIC-16W_7.5x10.3mm_P1.27mm | U60 |
| 1 | REG1_App_Connector | PinHeader_1x10_P2.54mm_Horizontal | J1 |
| 2 | Conn_01x06 | PhoenixContact_MC_1,5_6-G-3.5_1x06_P3.50mm_Horizontal | J50, J60 |
| 1 | 2038-15-SM-RPLF | DIO-DT-SMD-3P_L7.5-W5.0 | GD60 |
| 1 | 0 | R_0603_1608Metric | JP60 |
| 1 | SM712 | SOT-23 | D60 |
| 2 | TBU-CA065-200-WH | DIO-SMD_3P-L6.5-W4.0-BI | D61, D62 |
| 2 | 10uF/6.3V | C_0402_1005Metric | C60, C64 |
| 2 | 100nF | C_0402_1005Metric | C61, C63 |
| 2 | 1u | C_0402_1005Metric | C62, C65 |
| 4 | 820 | R_0603_1608Metric | R50, R51, R52, R53 |
| 4 | 560 | R_0603_1608Metric | R55, R56, R57, R58 |
| 1 | 220 | R_0603_1608Metric | R60 |
| 2 | 390 | R_0603_1608Metric | R61, R62 |
| 3 | 10k | R_0402_1005Metric | R63, R64, R65 |
REG1-App-GW-RS485 design files
The KiCad project lives in the OpenKNX/OpenKNX-REG1 repository on GitHub; these links point at the commit this page was built from.
REG1-App-GW-RS485: common questions
How big is the REG1-App-GW-RS485 PCB?
The REG1-App-GW-RS485 measures 83 × 32.8 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the REG1-App-GW-RS485?
33 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the REG1-App-GW-RS485 design files?
From the OpenKNX/OpenKNX-REG1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the REG1-App-GW-RS485 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in OpenKNX-REG1
RP2040/RP2350REG1-IpController2040
83.2 × 15.7 mm86 parts4LCC-BY-NC-4.09
REG1-App-Eth
83 × 32.8 mm58 parts2LCC-BY-NC-4.09
RP2040/RP2350REG1-Controller2040
83.2 × 15.7 mm46 parts2LCC-BY-NC-4.09
REG1-App-SA-4xSELV
83 × 32.8 mm44 parts2LCC-BY-NC-4.09
REG1-App-Dali
83 × 32.8 mm26 parts2LCC-BY-NC-4.09
NanoDCU
17 × 18 mm25 parts2LCC-BY-NC-4.09
REG1-App-2xDALI
83 × 32.8 mm23 parts2LCC-BY-NC-4.09
REG1-App-SEN-Multi
83 × 32.8 mm23 parts2LCC-BY-NC-4.09
REG1-Front-RGB
28.5 × 52.8 mm17 parts2LCC-BY-NC-4.09
REG1-Front-Universal
15.7 × 42.8 mm15 parts2LCC-BY-NC-4.09
REG1-App-Universal
83 × 32.8 mm4 parts2LCC-BY-NC-4.09