REG1-App-Dali
About the REG1-App-Dali PCB
REG1-App-Dali is an open source PCB design by OpenKNX, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 83 × 32.8 mm, with 26 components from 20 distinct parts.
Other key parts include the EL817S1(C)(TU)-F, STN93003 and STN1HNK60. By type, the board carries 11 resistors, 4 ICs, 4 diodes, 2 transistors, 2 connectors and 2 capacitors.
From the project
see Wiki: https://github.com/OpenKNX/OpenKNX/wiki/OpenKNX-REG1
Main components on the REG1-App-Dali
REG1-App-Dali bill of materials (BOM)
26 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | EL817S1(C)(TU)-F | SOIC254P1030X390-4N | U1, U2 |
| 1 | STN93003 | SOT230P700X180-4N | U3 |
| 1 | STN1HNK60 | SOT-223 | U4 |
| 1 | BSS123 | SOT-23 | Q1 |
| 1 | BC857 | SOT-23 | Q2 |
| 1 | REG1_App_Connector | PinHeader_1x10_P2.54mm_Horizontal | J1 |
| 1 | Dali | PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal | J2 |
| 1 | MB10S | SOP245P670X290-4N | BR1 |
| 1 | 1SMA4746 | DIOM4325X250N | D1 |
| 1 | D_Zener_Small | D_SOD-123 | D2 |
| 1 | UDZSTE-175.6B | SODFL2512X90N | D3 |
| 1 | LED | LED_0603_1608Metric | D4 |
| 1 | 1n | C_0603_1608Metric | C1 |
| 1 | 2.2u | C_0805_2012Metric | C2 |
| 4 | 100k | R_1206_3216Metric | R1, R2, R4, R5 |
| 1 | 390 | R_0603_1608Metric | R3 |
| 1 | 16k | R_0805_2012Metric | R6 |
| 3 | 4.7k | R_0603_1608Metric | R7, R8, R9 |
| 1 | 1k | R_1206_3216Metric | R10 |
| 1 | 300 | R_1206_3216Metric | R11 |
REG1-App-Dali design files
The KiCad project lives in the OpenKNX/OpenKNX-REG1 repository on GitHub; these links point at the commit this page was built from.
REG1-App-Dali: common questions
How big is the REG1-App-Dali PCB?
The REG1-App-Dali measures 83 × 32.8 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the REG1-App-Dali?
26 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the REG1-App-Dali design files?
From the OpenKNX/OpenKNX-REG1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the REG1-App-Dali design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in OpenKNX-REG1
RP2040/RP2350REG1-IpController2040
83.2 × 15.7 mm86 parts4LCC-BY-NC-4.09
REG1-App-Eth
83 × 32.8 mm58 parts2LCC-BY-NC-4.09
RP2040/RP2350REG1-Controller2040
83.2 × 15.7 mm46 parts2LCC-BY-NC-4.09
REG1-App-SA-4xSELV
83 × 32.8 mm44 parts2LCC-BY-NC-4.09
REG1-App-GW-RS485
83 × 32.8 mm33 parts2LCC-BY-NC-4.09
NanoDCU
17 × 18 mm25 parts2LCC-BY-NC-4.09
REG1-App-SEN-Multi
83 × 32.8 mm23 parts2LCC-BY-NC-4.09
REG1-App-2xDALI
83 × 32.8 mm23 parts2LCC-BY-NC-4.09
REG1-Front-RGB
28.5 × 52.8 mm17 parts2LCC-BY-NC-4.09
REG1-Front-Universal
15.7 × 42.8 mm15 parts2LCC-BY-NC-4.09
REG1-App-Universal
83 × 32.8 mm4 parts2LCC-BY-NC-4.09