Battery Test Board
oresat·oresat-battery-testing·battery-test-board/battery-test-board.kicad_pcb
About the Battery Test Board
Battery Test Board is an open source PCB design by oresat, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 126.1 × 134.8 mm, with 70 components from 17 distinct parts.
Other key parts include the J104D2C12VDC.15S. By type, the board carries 18 resistors, 16 diodes, 10 ICs, 10 connectors, 4 battery holders and 4 fuses.
It belongs with the power & battery designs in this gallery.
From the project
Battery testing software and circuitry for testing cells and batteries to fly on the ISS
Battery testing software and circuitry for testing cells and batteries to fly on the ISS
For example on an Ubuntu system: /etc/udev/rules.d
This will allow you to run [filename].py without requiring sudo.
Note that you will have to find the correct devpaths again if you use your own device, then modify 99-b6mini.rules accordingly.
Choose a USB port on your computer to plug the battery board into and do not change it.

Main components on the Battery Test Board
Battery Test Board bill of materials (BOM)
70 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | J104D2C12VDC.15S relay | relay-dpdt-.3in | U1, U2, U3, U4, U5, U6, U7, U8 +2 |
| 2 | PJA3412-AU_R1_000A1 mosfet | SOT-23 | Q1, Q2 |
| 3 | PR20204VBDN Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | J1, J2, J7 |
| 5 | EBAA-02-C Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J3, J4, J5, J6, J10 |
| 2 | 732-5401-ND connector | IDC-Header_2x20_P2.54mm_Vertical | J8, J9 |
| 4 | BK-18650-PC2 battery | BatteryHolder_MPD_BH-18650-PC2 | BT0, BT1, BT2, BT3 |
| 4 | 2920L100PR Polyfuse 2A | Fuse_2920_7451Metric | F1, F2, F3, F4 |
| 4 | NXFT15XH103FA1B025 Thermistor | thermister-solderin | TH0, TH1, TH2, TH3 |
| 12 | NSR05T40P2T5G diode | D_0805_2012Metric | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 2 | 150120AS75000 Amber | LED_1206_3216Metric | D13, D14 |
| 2 | 150120VS75000 Green | LED_1206_3216Metric | D15, D16 |
| 2 | CL31A106KAHNNNE 10u | C_1206_3216Metric | C1, C2 |
| 3 | RMCF1206FT4K70 4k7 | R_1206_3216Metric | R1, R3, R17 |
| 3 | RMCF1206FT10K0 10K | R_1206_3216Metric | R2, R4, R18 |
| 4 | RMCF1206FT470R 470 | R_1206_3216Metric | R5, R7, R9, R11 |
| 4 | RMCF1206FT510K 510k | R_1206_3216Metric | R6, R8, R10, R12 |
| 4 | RMCF1206FT1M00 1M | R_1206_3216Metric | R13, R14, R15, R16 |
Battery Test Board design files
The KiCad project lives in the oresat/oresat-battery-testing repository on GitHub; these links point at the commit this page was built from.
Battery Test Board: common questions
How big is the Battery Test Board?
The Battery Test Board measures 126.1 × 134.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery Test Board?
70 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery Test Board design files?
From the oresat/oresat-battery-testing repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Battery Test Board design in my own project?
Yes, under the terms of its GPL-3.0 license, which oresat chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k