ESI +Z End Cap
About the ESI +Z End Cap PCB
ESI +Z End Cap is an open source PCB design by oresat, published on GitHub. It is a 4-layer board measuring 105.6 × 105.6 mm, with 34 components from 12 distinct parts.
Other key parts include the PN13156. By type, the board carries 15 resistors, 7 capacitors, 6 inductors, 2 ICs, 2 connectors and 1 antenna.
It belongs with the rf & radio designs in this gallery.
From the project
OreSat's +/-Z end caps, the PCBs on the very ends of the satellite.
The ESI +Z End Cap is the board that "caps" the +Z end of the ESI 3U CubeSat. It protects the +Z End Card and also carries two RMI3000 magnetometers, as far away from the internal OreSat magnetic noise as possible.
- Mag card hardware Git repository: - TODO: End Cap Design Notes + Design Review Notes
- Website: - Email: - Instagram: @pdxaerospace
- 4 layer board - Bounding box is 105.6 x 105.6 mm - Board thickness is 1.59 mm (0.063 inch)
Main components on the ESI +Z End Cap
ESI +Z End Cap bill of materials (BOM)
34 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PN13156 RM3100 PNI Sensors | RM3100-MagI2C | U1, U2 |
| 1 | M55-7011242R Harwin | J-Harwin-M55-7XX1242R | J1 |
| 1 | U.FL-R-SMT-1(10) U.FL-R-SMA Hirose | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | ANT1008 RFMi | RFMi-ANT1008-S-Band-Patch | ANT1 |
| 1 | 150060GS75000 GRN Wurth | LED_0603_1608Metric | D1 |
| 4 | PN13104 RM3100-XY PNI Sensors | RM3100 SEN-XY-f | L3, L4, L7, L8 |
| 2 | PN13101 RM3100-Z PNI Sensors | RM3100 SEN-Z-f | L5, L9 |
| 4 | C0603C104K5RACAUTO 100n KEMET | 0603-C-NOSILK | C1, C4, C5, C7 |
| 3 | GRT21BC71E106KE13K 10u Murata Electronics | 0805-C-NOSILK | C2, C3, C6 |
| 12 | RMCF0603FT121R 121 Stackpole Electronics | 0603-C-NOSILK | R1, R3, R4, R5, R6, R7, R10, R11 +4 |
| 1 | RMCF0603FT2K70 2.7k Stackpole Electronics | 0603-C-NOSILK | R2 |
| 2 | RMCF0603FT33K0 33k Stackpole Electronics | 0603-C-NOSILK | R8, R9 |
ESI +Z End Cap design files
The KiCad project lives in the oresat/oresat-endcaps repository on GitHub; these links point at the commit this page was built from.
ESI +Z End Cap: common questions
How big is the ESI +Z End Cap PCB?
The ESI +Z End Cap measures 105.6 × 105.6 mm, has 4 copper layers and is 1.7702 mm thick.
How many components are on the ESI +Z End Cap?
34 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESI +Z End Cap design files?
From the oresat/oresat-endcaps repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESI +Z End Cap design in my own project?
The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.
More boards in oresat-endcaps
OreSat1 -Z End Cap
105.6 × 105.6 mm42 parts4LNo license5
OreSat1 +Z End Cap
105.6 × 105.6 mm42 parts4LNo license5
OreSat0 +Z End Cap
105.6 × 105.6 mm41 parts2LNo license5
Oresat0.5-plusz end cap
105.6 × 105.6 mm35 parts2LNo license5
ESI -Z End Cap
105.6 × 105.6 mm34 parts4LNo license5
Oresat0.5-minusz end cap
105.6 × 105.6 mm27 parts2LNo license5
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372