Oresat0.5-minusz end cap
About the Oresat0.5-minusz end cap PCB
Oresat0.5-minusz end cap is an open source PCB design by oresat, published on GitHub. It is a 2-layer board measuring 105.6 × 105.6 mm, with 27 components from 10 distinct parts.
Other key parts include the LTC4305IGN#PBF and MMC5883MA. By type, the board carries 12 resistors, 8 capacitors, 3 ICs, 2 connectors, 1 antenna and 1 diode.
It belongs with the rf & radio designs in this gallery.
From the project
OreSat's +/-Z end caps, the PCBs on the very ends of the satellite.
These are the "end cap" PCBs that attach to the +Z and -Z ends of the satellites. Mostly these are to protect the end cards from "space", as well as to hold the magnetometers (two per end cap) as far as away from ferrous stuff as possible. It's also a good place for backup antennas, specifically patch antennas (S band and GPS L1).
- Cutouts for deployable antennas - Double magnetometers. - Single vertical 10mm tall 1.27 mm connector that plugs into the "end card" card. - On the End Cap: Harwin M55-6001242R 12 pin female vertical connector - On the End Card below: Harwin M55-7011242R 12 pin…
Main components on the Oresat0.5-minusz end cap
Oresat0.5-minusz end cap bill of materials (BOM)
27 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC4305IGN#PBF LTC4305 Analog Devices | 16-SSOP | U1 |
| 2 | MMC5883MA MMC5983MA Memsic | LGA-16(3X3) | U2, U3 |
| 1 | M55-7011242R Harwin | HARWIN-M55-70X1242R | J1 |
| 1 | U.FL-R-SMT-1(10) U.FL-R-SMA Hirose | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | GP.1575.25.2.A.02 Taoglas Limited | Taoglas-GPS-Patch-Antenna | ANT1 |
| 1 | 150060GS75000 GRN Wurth | LED-0603 | D2 |
| 5 | TMK107BJ104KAHT 100n Taiyo Yuden | .0603-B-NOSILK | C1, C2, C3, C7, C10 |
| 3 | GRT188R61C106KE13D 10u Murata | .0603-B-NOSILK | C4, C12, C13 |
| 9 | RMCF0603FT4K70 4.7k Stackpole Electronics Inc | .0603-B-NOSILK | R1, R3, R4, R5, R6, R7, R8, R9 +1 |
| 3 | RMCF0603FT2K70 2.7k Stackpole Electronics Inc | .0603-B-NOSILK | R2, R11, R12 |
Oresat0.5-minusz end cap design files
The KiCad project lives in the oresat/oresat-endcaps repository on GitHub; these links point at the commit this page was built from.
Oresat0.5-minusz end cap: common questions
How big is the Oresat0.5-minusz end cap PCB?
The Oresat0.5-minusz end cap measures 105.6 × 105.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Oresat0.5-minusz end cap?
27 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Oresat0.5-minusz end cap design files?
From the oresat/oresat-endcaps repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Oresat0.5-minusz end cap design in my own project?
The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.
More boards in oresat-endcaps
OreSat1 -Z End Cap
105.6 × 105.6 mm42 parts4LNo license5
OreSat1 +Z End Cap
105.6 × 105.6 mm42 parts4LNo license5
OreSat0 +Z End Cap
105.6 × 105.6 mm41 parts2LNo license5
Oresat0.5-plusz end cap
105.6 × 105.6 mm35 parts2LNo license5
ESI +Z End Cap
105.6 × 105.6 mm34 parts4LNo license5
ESI -Z End Cap
105.6 × 105.6 mm34 parts4LNo license5
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372