HardLabs

Oresat flatsat interface

oresat·oresat-flatsat·flatsat-to-oresat-jumper-card/oresat-flatsat-interface.kicad_pcb

Oresat flatsat interface PCB layout, top view — open source board by oresat

About the Oresat flatsat interface PCB

Oresat flatsat interface is an open source PCB design by oresat, published on GitHub. It is a 2-layer board measuring 99.8 × 109.6 mm, with 11 components from 7 distinct parts.

From the project

All things for the OreSat flatsat

A "flatsat" is a integration and debugging configuration of your satellite that allows you to more easily do system integration, software development, testing, and debugging. It's the "open" satellite that allows you to get at all the signals and ports.

Here's what our OreSat0 flatsat looks like -- note the cards laid out flat on the table, the power supply on the left, the ribbon cable and cards, and the small PC on the upper right (vertical wall) that interfaces everything to the interwebs.

Oresat flatsat interface, from the project README
From the project README

Oresat flatsat interface bill of materials (BOM)

11 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
J-SAMTEC-TFM-120-01-L-D-RA
J1
3
733000020
J2, J3, J4
3
Conn_Coaxial
J5, J6, J7
1
J-SAMTEC-TFM-110-01-L-D-RA
J8
1
Conn_01x40
J9
1
Conn_01x20
J10
1
ORESAT-CARD-V1.3-FLATSAT
PCB1

Oresat flatsat interface design files

The KiCad project lives in the oresat/oresat-flatsat repository on GitHub; these links point at the commit this page was built from.

Oresat flatsat interface: common questions

How big is the Oresat flatsat interface PCB?

The Oresat flatsat interface measures 99.8 × 109.6 mm, has 2 copper layers and is 1.7693 mm thick.

How many components are on the Oresat flatsat interface?

11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Oresat flatsat interface design files?

From the oresat/oresat-flatsat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Oresat flatsat interface design in my own project?

The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.

More boards in oresat-flatsat