HardLabs

Card debug board-3

oresat·oresat-flatsat·card-debug-board-3/card-debug-board-3.kicad_pcb

Card debug board-3 layout, top view — open source RP2040/RP2350 board by oresat

About the Card debug board-3

Card debug board-3 is an open source RP2040/RP2350 PCB design by oresat, published on GitHub. It is a 4-layer board measuring 54 × 64 mm, with 78 components from 32 distinct parts.

Its main chip is the SC0914(13), from the RP2040/RP2350 family. Other key parts include the MIC5205-3.3YM5-TR, W25Q16JVSSIQ TR, SN74AUP1G17DBVR and IP4234CZ6,125. By type, the board carries 27 resistors, 19 capacitors, 10 diodes, 7 ICs, 6 connectors and 4 transistors.

From the project

All things for the OreSat flatsat

The OreSat Debug Board v3 is a Raspberry Pi Pico-based debugger interface for OreSat cards and subsystems. It features:

- A Raspberry Pi Pico running Raspberry Pi Debug Probe firmware - Provides a SWD debugger to the target - Provides a virtual UART to the target - Two USB C ports - USB C for the Pico running the Debug Probe firmware, programming the Pico using CircuitPython, and (partially) powering up the target. - USB C for the USB device interface on all Octavo SM-based cards - The older 20 pin FFC connector (Debug Connector v2) - The newer 14 pin JST connector (Debug Connector v3) - A…

Main components on the Card debug board-3

MIC5205-3.3YM5-TRW25Q16JVSSIQ TRSC0914(13)SN74AUP1G17DBVRIP4234CZ6,125

Card debug board-3 bill of materials (BOM)

78 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MIC5205-3.3YM5-TR
MIC5205-3.3YM5
Microchip Technology
U1
1
W25Q16JVSSIQ TR
W25Q16JVSS
Winbond Electronics
U2
1
SC0914(13)
RP2040
Raspberry Pi
U3
2
SN74AUP1G17DBVR
74AUP1G17
TI
U4, U5
2
IP4234CZ6,125
Nexperia
U6, U7
2
DMN3028LQ-7
Diodes Incorporated
Q1, Q2
2
DMP2035UQ-7
Diodes Incorporated
Q3, Q4
1
RH100-12.000-12-1010-X-TR-NS2
12 MHz
Raltron
Y1
2
USB4105-GF-A
GCT
J1, J2
1
Conn_01x05
J3
1
SM14B-SHLS-TF
5040501291
JST
J4
1
2-1734592-0
TE Connectivity
J5
1
Conn_01x03
J6
2
B3F-1000
Omron Electronics
SW1, SW3
1
PCM13SMTR
C&K
SW2
1
CFS-0100MC
SW_DIP_x01
Nidec Components Corporation
SW4
4
150060GS75020
GRN
Wurth
D1, D2, D4, D8
2
150060AS75000
AMB
Wurth
D3, D5
3
ZLLS410TA
Diodes Inc
D6, D7, D10
1
AMB
D9
Show 12 more
QtyPartRefs
12
C0603C104K5RACAUTO
100n
KEMET
C1, C2, C4, C10, C11, C15, C16, C17 +4
2
GRT21BC71E106KE13K
10u
Murata Electronics
C3, C6
1
C0603C471K5RACAUTO
470p
KEMET
C5
2
0603N150J500CT
15p
Walsin
C7, C8
2
GRT188C71E225KE13D
2.2u
Murata Electronics
C9, C12
8
RMCF0603FT1K00
1k
Stackpole Electronics Inc
R1, R8, R9, R10, R11, R12, R22, R23
4
RMCF0603FT5K10
5.1k
Stackpole Electronics Inc
R2, R3, R4, R5
2
RMCF0603FT27R0
27
Stackpole Electronics Inc
R6, R7
6
RMCF0603FT100R
100
Stackpole Electronics Inc
R13, R14, R15, R17, R18, R19
5
RMCF0603FT10K0
10k
Stackpole Electronics Inc
R16, R21, R25, R26, R27
1
100
R20
1
1k
R24

Card debug board-3 design files

The KiCad project lives in the oresat/oresat-flatsat repository on GitHub; these links point at the commit this page was built from.

Card debug board-3: common questions

What microcontroller does the Card debug board-3 use?

The Card debug board-3 is built around the SC0914(13), from the RP2040/RP2350 family.

How big is the Card debug board-3?

The Card debug board-3 measures 54 × 64 mm, has 4 copper layers and is 1.7702 mm thick.

How many components are on the Card debug board-3?

78 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Card debug board-3 design files?

From the oresat/oresat-flatsat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Card debug board-3 design in my own project?

The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Card debug board-3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in oresat-flatsat

Similar boards