OreSat Backplane Debug Breakout
About the OreSat Backplane Debug Breakout
OreSat Backplane Debug Breakout is an open source PCB design by oresat, published on GitHub. It is a 2-layer board measuring 60 × 63 mm, with 14 components from 14 distinct parts.
Other key parts include the UMFT234XF. By type, the board carries 4 connectors, 3 switches, 2 diodes, 1 IC, 1 fuse and 1 test point.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
All things for the OreSat flatsat
A "flatsat" is a integration and debugging configuration of your satellite that allows you to more easily do system integration, software development, testing, and debugging. It's the "open" satellite that allows you to get at all the signals and ports.
Here's what our OreSat0 flatsat looks like -- note the cards laid out flat on the table, the power supply on the left, the ribbon cable and cards, and the small PC on the upper right (vertical wall) that interfaces everything to the interwebs.
Main components on the OreSat Backplane Debug Breakout
OreSat Backplane Debug Breakout bill of materials (BOM)
14 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | UMFT234XF FTDI, Future Technology Devices International Ltd | UMFT234XF | U1 |
| 1 | 61201621621 Conn_02x08_Odd_Even Würth Elektronik | IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | 1995499 Conn_01x02_Socket Phoenix | PHOENIX_1995499 | J4 |
| 1 | 0757570441 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 629105150521 Würth Elektronik | USB_Micro-B_Wuerth_629105150521_CircularHoles | J6 |
| 1 | 01550900DR LittelFuse | Littelfuse 155900DR | F1 |
| 1 | EG2209 E-Switch | EG2209 DPDT | SW1 |
| 1 | B3F-1000 Omron | SW_PUSH_6mm | SW2 |
| 1 | EG1218 E-Switch | PinHeader_1x03_P2.54mm_Vertical | SW3 |
| 1 | TestPoint | TestPoint-0.75mm-th | TP1 |
| 1 | MUR315SH TSM MURS315SH TSM | Diode TSM MURS315SH | D1 |
| 1 | 150060RS75000 LED Wurth | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | TMK107BJ104KAHT 100n Taiyo Yuden | C_0603_1608Metric | C1 |
| 1 | RMCF0603FT4K70 4.7k Stackpole Electronics Inc | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
OreSat Backplane Debug Breakout design files
The KiCad project lives in the oresat/oresat-flatsat repository on GitHub; these links point at the commit this page was built from.
OreSat Backplane Debug Breakout: common questions
How big is the OreSat Backplane Debug Breakout?
The OreSat Backplane Debug Breakout measures 60 × 63 mm, has 2 copper layers and is 1.646 mm thick.
How many components are on the OreSat Backplane Debug Breakout?
14 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OreSat Backplane Debug Breakout design files?
From the oresat/oresat-flatsat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OreSat Backplane Debug Breakout design in my own project?
The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.
More boards in oresat-flatsat
RP2040/RP2350Card debug board-3
54 × 64 mm78 parts4LNo license1
OreSat C3 Proxy Board
69.8 × 50 mm63 parts4LNo license1
Oresat C3 Surrogate
99.8 × 94.6 mm36 parts2LNo license1
Card debug board-2
36 × 52 mm30 parts2LNo license1
Swd to card debug-3
54 × 34.1 mm14 parts2LNo license1
Oresat flatsat interface
99.8 × 109.6 mm11 parts2LNo license1
Flatsat breakout main
34 × 94 mm5 parts4LNo license1
Backplane debug
34.8 × 12.1 mm3 parts2LNo license1
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979