HardLabs

Flatsat breakout main

oresat·oresat-flatsat·flatsat-breakout/flatsat-breakout-main.kicad_pcb

Flatsat breakout main layout, top view — open source board by oresat

About the Flatsat breakout main

Flatsat breakout main is an open source PCB design by oresat, published on GitHub. It is a 4-layer board measuring 34 × 94 mm, with 5 components from 4 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

All things for the OreSat flatsat

A "flatsat" is a integration and debugging configuration of your satellite that allows you to more easily do system integration, software development, testing, and debugging. It's the "open" satellite that allows you to get at all the signals and ports.

Here's what our OreSat0 flatsat looks like -- note the cards laid out flat on the table, the power supply on the left, the ribbon cable and cards, and the small PC on the upper right (vertical wall) that interfaces everything to the interwebs.

Flatsat breakout main, from the project README
From the project README

Flatsat breakout main bill of materials (BOM)

5 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SFM-120-02-L-DH-TR
Samtec
J1
2
61204021621
Wurth
J2, J3
1
68000-227HLF
Amphenol
J4
1
61201621621
Conn_02x08_Odd_Even
Wurth
J5

Flatsat breakout main design files

The KiCad project lives in the oresat/oresat-flatsat repository on GitHub; these links point at the commit this page was built from.

Flatsat breakout main: common questions

How big is the Flatsat breakout main?

The Flatsat breakout main measures 34 × 94 mm, has 4 copper layers and is 1.7702 mm thick.

How many components are on the Flatsat breakout main?

5 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flatsat breakout main design files?

From the oresat/oresat-flatsat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Flatsat breakout main design in my own project?

The repository has no license, so all rights stay with oresat. Use it as a reference, and ask the author before reusing the design.

More boards in oresat-flatsat

Similar boards