Klipper nano expander
orobardet·klipper_nano_expander
About the Klipper nano expander PCB
Klipper nano expander is an open source PCB design by orobardet, published on GitHub under the MIT license. It is a 2-layer board measuring 65.3 × 18.3 mm, with 34 components from 14 distinct parts.
By type, the board carries 12 resistors, 8 capacitors, 4 transformers, 3 transistors, 2 connectors and 1 fuse.
It belongs with the dev boards & breakouts and sensors designs in this gallery.
From the project
Klipper Nano Expander, an Arduino Nano Shield to be used as an auxiliary Klipper MCU
An Arduino Nano Shield to use with Klipper 3D printer firmware, as a auxiliary MCU.
- Only require an Arduino Nano - +5V optional external power supply with fuse - Connected to the Arduino Nano 5V - Only required if you need more than 500mA power, else the Nano power supply should be enough - x4 temperature sensors (or any analog device as input) - x3 PWM mosfet driven port (or any PWM controlled device as output) - x1 Neopixel (external 5V power supply needed)

Klipper nano expander bill of materials (BOM)
34 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IRLML6344TRPBF Infineon Technologies | SOT-23 | Q1, Q2, Q3 |
| 1 | +5Vin | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2 |
| 1 | Fuse | 3544-2_FuseHolder | F1 |
| 3 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | FAN0, FAN1, FAN2 |
| 4 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | T0, T1, T2, T3 |
| 1 | 17-215SURC/S530-A2/TR8 LED | LED_0805_2012Metric | D3 |
| 2 | CL21A106KPFNNNE 10uF | C_0805_2012Metric | C1, C8 |
| 2 | CC0805KRX7R9BB104 0.1uF | C_0805_2012Metric | C2, C3 |
| 4 | CC0805KKX5R8BB475 4.7uF | C_0805_2012Metric | C4, C5, C6, C7 |
| 1 | RC0805JR-071KL 1K | R_0805_2012Metric | R1 |
| 4 | RC0805JR-07100RL 100 | R_0805_2012Metric | R3, R6, R9, R15 |
| 3 | RC0805JR-0710KL 10K | R_0805_2012Metric | R4, R7, R10 |
| 4 | RC0805JR-074K7L 4.7K | R_0805_2012Metric | R11, R12, R13, R14 |
Klipper nano expander design files
The KiCad project lives in the orobardet/klipper_nano_expander repository on GitHub; these links point at the commit this page was built from.
Klipper nano expander: common questions
How big is the Klipper nano expander PCB?
The Klipper nano expander measures 65.3 × 18.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Klipper nano expander?
34 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Klipper nano expander design files?
From the orobardet/klipper_nano_expander repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Klipper nano expander design in my own project?
Yes, under the terms of its MIT license, which orobardet chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k