HardLabs

Sender r3 external

p-keminer·iot-alarm-system·hardware/pcb/sender/sender_r3_external.kicad_pcb

Sender r3 external PCB layout, top view — open source AVR/Arduino board by p-keminer

About the Sender r3 external PCB

Sender r3 external is an open source AVR/Arduino PCB design by p-keminer, published on GitHub under the MIT license. It is a 2-layer board measuring 165.5 × 125.5 mm, with 17 components from 11 distinct parts.

Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. By type, the board carries 6 resistors, 5 connectors, 4 diodes, 1 module and 1 buzzer.

It belongs with the iot & wireless designs in this gallery.

From the project

IoT-Basis-Alarmanlage mit ESP8266-Nodes, Elegoo Uno R3, Raspberry Pi Zero 2 W, HMAC-SHA256-Absicherung, eigenen PCBs und 3D-gedruckten Gehäusen. // IoT basic alarm system with ESP8266 nodes, Elegoo Uno R3, Raspberry Pi Zero 2 W, HMAC-SHA256 security, custom PCBs, and 3D-printed housings.

Die IoT-Alarmanlage basiert auf einem Elegoo Uno R3, zwei ESP8266 und einem Raspberry Pi Zero 2 W. RFID und zwei Reed-Sensoren steuern die lokale Alarm-FSM. Ein Funkpfad uebertraegt Alarmzustaende an den Empfaenger; das Dashboard zeigt Telemetrie, Logs und Aufnahmen und sendet freigegebene Befehle.

Dieses Projekt entstand in meinem ersten Studiensemester und war mein erstes Lernprojekt.

Sender r3 external, from the project README
From the project README

Main components on the Sender r3 external

Arduino_UNO_R3

Sender r3 external bill of materials (BOM)

17 components, 11 distinct parts.

QtyPartRefs
1
Arduino_UNO_R3
A1
1
RFID-RC522
J1
2
KY-021
J2, J3
1
Links
J4
1
Rechts
J5
1
Buzzer
BZ1
4
LED
D1, D2, D3, D4
3
330
R1, R2, R3
1
100
R4
1
1k
R5
1
2k
R6

Sender r3 external design files

The KiCad project lives in the p-keminer/iot-alarm-system repository on GitHub; these links point at the commit this page was built from.

Sender r3 external: common questions

What microcontroller does the Sender r3 external use?

The Sender r3 external is built around the Arduino_UNO_R3, from the AVR/Arduino family.

How big is the Sender r3 external PCB?

The Sender r3 external measures 165.5 × 125.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sender r3 external?

17 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sender r3 external design files?

From the p-keminer/iot-alarm-system repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sender r3 external design in my own project?

Yes, under the terms of its MIT license, which p-keminer chose for the repository.

Can I test firmware for the Sender r3 external without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in iot-alarm-system

Similar boards