BatteryPack 16S A4 Breakout
P-Shreyas543·BatteryPack_16S_A4_Breakout
About the BatteryPack 16S A4 Breakout
BatteryPack 16S A4 Breakout is an open source PCB design by P-Shreyas543, published on GitHub. It is a 4-layer board measuring 297 × 210 mm, with 134 components from 21 distinct parts.
By type, the board carries 16 LEDs, 14 battery holders, 4 connectors and 1 fuse.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
KiCad 10 project for a 14S (58.8 V max, 50.4 V nominal) 18650 battery pack on a 297 × 210 mm (A4) 4-layer PCB, built as a BMS breakout and training board.
KiCad 10 project for a 14S (58.8 V max, 50.4 V nominal) 18650 battery pack on a 297 × 210 mm (A4) 4-layer PCB, built as a BMS breakout and training board.
NTC map: NTC1 = C1/C2, NTC2 = C3/C4, NTC3 = C5/C6 (left column), NTC4 = board centre line on the cell 7→8 bus, NTC5 = C13/C14, NTC6 = C11/C12, NTC7 = C9/C10 (right column).
Side-entry XH headers (S15B) are out of stock at LCSC, so the top-entry headers sit right on the top edge. Re-check LCSC stock before ordering. The holder, the test loops and the SOD-323 TVS have the lowest stock.

BatteryPack 16S A4 Breakout bill of materials (BOM)
134 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B15B-XH-A(LF)(SN) B15B-XH-A JST | JST_XH_B15B-XH-A_1x15_P2.50mm_Vertical | J1 |
| 1 | B14B-XH-A(LF)(SN) B14B-XH-A JST | JST_XH_B14B-XH-A_1x14_P2.50mm_Vertical | J2 |
| 1 | T44009 PACK+ M4 XFCN | CONN-TH_4P-L11.1-W9.2-P5.00-T44009 | J3 |
| 1 | T44009 PACK- M4 XFCN | CONN-TH_4P-L11.1-W9.2-P5.00-T44009 | J4 |
| 14 | BH-18650-B1BA002 18650 holder MYOUNG | BH18650B1BA002 | BT1, BT2, BT3, BT4, BT5, BT6, BT7, BT8 +6 |
| 1 | BZX84C43 LGE | SOT-23 | D_HV1 |
| 14 | 1N4148WS CJ | D_SOD-323 | D_REV1, D_REV2, D_REV3, D_REV4, D_REV5, D_REV6, D_REV7, D_REV8 +6 |
| 14 | LKS05D3-B LANKE | D_SOD-323 | D_TVS1, D_TVS2, D_TVS3, D_TVS4, D_TVS5, D_TVS6, D_TVS7, D_TVS8 +6 |
| 1 | SMCJ70CA MDD | D_SMC | D_TVS_MAIN1 |
| 1 | FH1-200CK-B 5x20 holder, fit 10A HONGJU | FUSE-TH_L24.8-W9.8-P22.60 | F1 |
| 15 | MF-MSMF010-2 MF-MSMF010-2 60V/0.1A BOURNS | Fuse_1812_4532Metric | F_PTC1, F_PTC2, F_PTC3, F_PTC4, F_PTC5, F_PTC6, F_PTC7, F_PTC8 +7 |
| 1 | MMBTA42 JSCJ | SOT-23 | Q_HV1 |
| 2 | 0805W8F4702T5E 47k UNI-ROYAL | R_0805_2012Metric | R_FB1, R_HV_PD1 |
| 1 | 0805W8F1002T5E 10k UNI-ROYAL | R_0805_2012Metric | R_HV_BASE1 |
| 1 | 1206W4F2202T5E 22k 1206 UNI-ROYAL | R_1206_3216Metric | R_HV_LED1 |
| 14 | 0805W8F1001T5E 1k UNI-ROYAL | R_0805_2012Metric | R_REV1, R_REV2, R_REV3, R_REV4, R_REV5, R_REV6, R_REV7, R_REV8 +6 |
| 7 | MF52A103F3950 10k B3950 1% Nanjing Shiheng | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | TH1, TH2, TH3, TH4, TH5, TH6, TH7 |
| 14 | 5001 5001 BLK Keystone | TestPoint_Keystone_5000-5004_Miniature | TP_N1, TP_N2, TP_N3, TP_N4, TP_N5, TP_N6, TP_N7, TP_N8 +6 |
| 14 | 5000 5000 RED Keystone | TestPoint_Keystone_5000-5004_Miniature | TP_P1, TP_P2, TP_P3, TP_P4, TP_P5, TP_P6, TP_P7, TP_P8 +6 |
| 1 | KT-0805Y AMBER Hubei KENTO | LED_0805_2012Metric | LED_FB1 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 15 | NCD0805R1 RED NATIONSTAR | LED_0805_2012Metric | LED_HV1, LED_REV1, LED_REV2, LED_REV3, LED_REV4, LED_REV5, LED_REV6, LED_REV7 +7 |
BatteryPack 16S A4 Breakout design files
The KiCad project lives in the P-Shreyas543/BatteryPack_16S_A4_Breakout repository on GitHub; these links point at the commit this page was built from.
BatteryPack 16S A4 Breakout: common questions
How big is the BatteryPack 16S A4 Breakout?
The BatteryPack 16S A4 Breakout measures 297 × 210 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BatteryPack 16S A4 Breakout?
134 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BatteryPack 16S A4 Breakout design files?
From the P-Shreyas543/BatteryPack_16S_A4_Breakout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BatteryPack 16S A4 Breakout design in my own project?
The repository has no license, so all rights stay with P-Shreyas543. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k